Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.10;

import {DataTypes} from "contracts/lending/core/protocol/libraries/types/DataTypes.sol";
import {IERC20Detailed} from "contracts/lending/core/dependencies/openzeppelin/contracts/IERC20Detailed.sol";
import {IPoolAddressesProvider} from "contracts/lending/core/interfaces/IPoolAddressesProvider.sol";
import {BaseOdosSellAdapter} from "./BaseOdosSellAdapter.sol";
import {SafeERC20} from "contracts/lending/core/dependencies/openzeppelin/contracts/SafeERC20.sol";
import {ReentrancyGuard} from "../../dependencies/openzeppelin/ReentrancyGuard.sol";
import {IOdosWithdrawSwapAdapter} from "./interfaces/IOdosWithdrawSwapAdapter.sol";
import {IOdosRouterV2} from "contracts/odos/interface/IOdosRouterV2.sol";
import {IERC20} from "contracts/lending/core/dependencies/openzeppelin/contracts/IERC20.sol";

/**
 * @title OdosWithdrawSwapAdapter
 * @notice Adapter to swap then withdraw using Odos
 */
contract OdosWithdrawSwapAdapter is
    BaseOdosSellAdapter,
    ReentrancyGuard,
    IOdosWithdrawSwapAdapter
{
    using SafeERC20 for IERC20;

    constructor(
        IPoolAddressesProvider addressesProvider,
        address pool,
        IOdosRouterV2 swapRouter,
        address owner
    ) BaseOdosSellAdapter(addressesProvider, pool, swapRouter) {
        transferOwnership(owner);
    }

    /**
     * @dev Implementation of the reserve data getter from the base adapter
     * @param asset The address of the asset
     * @return The address of the vToken, sToken and aToken
     */
    function _getReserveData(
        address asset
    ) internal view override returns (address, address, address) {
        DataTypes.ReserveData memory reserveData = POOL.getReserveData(asset);
        return (
            reserveData.variableDebtTokenAddress,
            reserveData.stableDebtTokenAddress,
            reserveData.aTokenAddress
        );
    }

    /**
     * @dev Implementation of the supply function from the base adapter
     * @param asset The address of the asset to be supplied
     * @param amount The amount of the asset to be supplied
     * @param to The address receiving the aTokens
     * @param referralCode The referral code to pass to Aave
     */
    function _supply(
        address asset,
        uint256 amount,
        address to,
        uint16 referralCode
    ) internal override {
        POOL.supply(asset, amount, to, referralCode);
    }

    /// @inheritdoc IOdosWithdrawSwapAdapter
    function withdrawAndSwap(
        WithdrawSwapParams memory withdrawSwapParams,
        PermitInput memory permitInput
    ) external nonReentrant {
        // pulls liquidity asset from the user and withdraw
        _pullATokenAndWithdraw(
            withdrawSwapParams.oldAsset,
            withdrawSwapParams.user,
            withdrawSwapParams.oldAssetAmount,
            permitInput
        );

        // sell(exact in) withdrawn asset from Aave Pool to new asset
        uint256 amountReceived = _sellOnOdos(
            IERC20Detailed(withdrawSwapParams.oldAsset),
            IERC20Detailed(withdrawSwapParams.newAsset),
            withdrawSwapParams.oldAssetAmount,
            withdrawSwapParams.minAmountToReceive,
            withdrawSwapParams.swapData
        );

        // transfer new asset to the user
        IERC20(withdrawSwapParams.newAsset).safeTransfer(
            withdrawSwapParams.user,
            amountReceived
        );
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

/// @notice Modern and gas efficient ERC20 + EIP-2612 implementation.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/tokens/ERC20.sol)
/// @author Modified from Uniswap (https://github.com/Uniswap/uniswap-v2-core/blob/master/contracts/UniswapV2ERC20.sol)
/// @dev Do not manually set balances without updating totalSupply, as the sum of all user balances must not exceed it.
abstract contract ERC20 {
    /*//////////////////////////////////////////////////////////////
                                 EVENTS
    //////////////////////////////////////////////////////////////*/

    event Transfer(address indexed from, address indexed to, uint256 amount);

    event Approval(address indexed owner, address indexed spender, uint256 amount);

    /*//////////////////////////////////////////////////////////////
                            METADATA STORAGE
    //////////////////////////////////////////////////////////////*/

    string public name;

    string public symbol;

    uint8 public immutable decimals;

    /*//////////////////////////////////////////////////////////////
                              ERC20 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 public totalSupply;

    mapping(address => uint256) public balanceOf;

    mapping(address => mapping(address => uint256)) public allowance;

    /*//////////////////////////////////////////////////////////////
                            EIP-2612 STORAGE
    //////////////////////////////////////////////////////////////*/

    uint256 internal immutable INITIAL_CHAIN_ID;

    bytes32 internal immutable INITIAL_DOMAIN_SEPARATOR;

    mapping(address => uint256) public nonces;

    /*//////////////////////////////////////////////////////////////
                               CONSTRUCTOR
    //////////////////////////////////////////////////////////////*/

    constructor(
        string memory _name,
        string memory _symbol,
        uint8 _decimals
    ) {
        name = _name;
        symbol = _symbol;
        decimals = _decimals;

        INITIAL_CHAIN_ID = block.chainid;
        INITIAL_DOMAIN_SEPARATOR = computeDomainSeparator();
    }

    /*//////////////////////////////////////////////////////////////
                               ERC20 LOGIC
    //////////////////////////////////////////////////////////////*/

    function approve(address spender, uint256 amount) public virtual returns (bool) {
        allowance[msg.sender][spender] = amount;

        emit Approval(msg.sender, spender, amount);

        return true;
    }

    function transfer(address to, uint256 amount) public virtual returns (bool) {
        balanceOf[msg.sender] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(msg.sender, to, amount);

        return true;
    }

    function transferFrom(
        address from,
        address to,
        uint256 amount
    ) public virtual returns (bool) {
        uint256 allowed = allowance[from][msg.sender]; // Saves gas for limited approvals.

        if (allowed != type(uint256).max) allowance[from][msg.sender] = allowed - amount;

        balanceOf[from] -= amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(from, to, amount);

        return true;
    }

    /*//////////////////////////////////////////////////////////////
                             EIP-2612 LOGIC
    //////////////////////////////////////////////////////////////*/

    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) public virtual {
        require(deadline >= block.timestamp, "PERMIT_DEADLINE_EXPIRED");

        // Unchecked because the only math done is incrementing
        // the owner's nonce which cannot realistically overflow.
        unchecked {
            address recoveredAddress = ecrecover(
                keccak256(
                    abi.encodePacked(
                        "\x19\x01",
                        DOMAIN_SEPARATOR(),
                        keccak256(
                            abi.encode(
                                keccak256(
                                    "Permit(address owner,address spender,uint256 value,uint256 nonce,uint256 deadline)"
                                ),
                                owner,
                                spender,
                                value,
                                nonces[owner]++,
                                deadline
                            )
                        )
                    )
                ),
                v,
                r,
                s
            );

            require(recoveredAddress != address(0) && recoveredAddress == owner, "INVALID_SIGNER");

            allowance[recoveredAddress][spender] = value;
        }

        emit Approval(owner, spender, value);
    }

    function DOMAIN_SEPARATOR() public view virtual returns (bytes32) {
        return block.chainid == INITIAL_CHAIN_ID ? INITIAL_DOMAIN_SEPARATOR : computeDomainSeparator();
    }

    function computeDomainSeparator() internal view virtual returns (bytes32) {
        return
            keccak256(
                abi.encode(
                    keccak256("EIP712Domain(string name,string version,uint256 chainId,address verifyingContract)"),
                    keccak256(bytes(name)),
                    keccak256("1"),
                    block.chainid,
                    address(this)
                )
            );
    }

    /*//////////////////////////////////////////////////////////////
                        INTERNAL MINT/BURN LOGIC
    //////////////////////////////////////////////////////////////*/

    function _mint(address to, uint256 amount) internal virtual {
        totalSupply += amount;

        // Cannot overflow because the sum of all user
        // balances can't exceed the max uint256 value.
        unchecked {
            balanceOf[to] += amount;
        }

        emit Transfer(address(0), to, amount);
    }

    function _burn(address from, uint256 amount) internal virtual {
        balanceOf[from] -= amount;

        // Cannot underflow because a user's balance
        // will never be larger than the total supply.
        unchecked {
            totalSupply -= amount;
        }

        emit Transfer(from, address(0), amount);
    }
}

// SPDX-License-Identifier: AGPL-3.0-only
pragma solidity >=0.8.0;

import {ERC20} from "../tokens/ERC20.sol";

/// @notice Safe ETH and ERC20 transfer library that gracefully handles missing return values.
/// @author Solmate (https://github.com/Rari-Capital/solmate/blob/main/src/utils/SafeTransferLib.sol)
/// @dev Use with caution! Some functions in this library knowingly create dirty bits at the destination of the free memory pointer.
/// @dev Note that none of the functions in this library check that a token has code at all! That responsibility is delegated to the caller.
library SafeTransferLib {
    /*//////////////////////////////////////////////////////////////
                             ETH OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferETH(address to, uint256 amount) internal {
        bool success;

        assembly {
            // Transfer the ETH and store if it succeeded or not.
            success := call(gas(), to, amount, 0, 0, 0, 0)
        }

        require(success, "ETH_TRANSFER_FAILED");
    }

    /*//////////////////////////////////////////////////////////////
                            ERC20 OPERATIONS
    //////////////////////////////////////////////////////////////*/

    function safeTransferFrom(
        ERC20 token,
        address from,
        address to,
        uint256 amount
    ) internal {
        bool success;

        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x23b872dd00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), from) // Append the "from" argument.
            mstore(add(freeMemoryPointer, 36), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 68), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 100 because the length of our calldata totals up like so: 4 + 32 * 3.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 100, 0, 32)
            )
        }

        require(success, "TRANSFER_FROM_FAILED");
    }

    function safeTransfer(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0xa9059cbb00000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "TRANSFER_FAILED");
    }

    function safeApprove(
        ERC20 token,
        address to,
        uint256 amount
    ) internal {
        bool success;

        assembly {
            // Get a pointer to some free memory.
            let freeMemoryPointer := mload(0x40)

            // Write the abi-encoded calldata into memory, beginning with the function selector.
            mstore(freeMemoryPointer, 0x095ea7b300000000000000000000000000000000000000000000000000000000)
            mstore(add(freeMemoryPointer, 4), to) // Append the "to" argument.
            mstore(add(freeMemoryPointer, 36), amount) // Append the "amount" argument.

            success := and(
                // Set success to whether the call reverted, if not we check it either
                // returned exactly 1 (can't just be non-zero data), or had no return data.
                or(and(eq(mload(0), 1), gt(returndatasize(), 31)), iszero(returndatasize())),
                // We use 68 because the length of our calldata totals up like so: 4 + 32 * 2.
                // We use 0 and 32 to copy up to 32 bytes of return data into the scratch space.
                // Counterintuitively, this call must be positioned second to the or() call in the
                // surrounding and() call or else returndatasize() will be zero during the computation.
                call(gas(), token, 0, freeMemoryPointer, 68, 0, 32)
            )
        }

        require(success, "APPROVE_FAILED");
    }
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

// OpenZeppelin Contracts v4.4.1 (utils/Address.sol)

pragma solidity ^0.8.0;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize, which returns 0 for contracts in
        // construction, since the code is only stored at the end of the
        // constructor execution.

        uint256 size;
        assembly {
            size := extcodesize(account)
        }
        return size > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://diligence.consensys.net/posts/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.5.11/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(
            address(this).balance >= amount,
            "Address: insufficient balance"
        );

        (bool success, ) = recipient.call{value: amount}("");
        require(
            success,
            "Address: unable to send value, recipient may have reverted"
        );
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data
    ) internal returns (bytes memory) {
        return functionCall(target, data, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value
    ) internal returns (bytes memory) {
        return
            functionCallWithValue(
                target,
                data,
                value,
                "Address: low-level call with value failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(
            address(this).balance >= value,
            "Address: insufficient balance for call"
        );
        require(isContract(target), "Address: call to non-contract");

        (bool success, bytes memory returndata) = target.call{value: value}(
            data
        );
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data
    ) internal view returns (bytes memory) {
        return
            functionStaticCall(
                target,
                data,
                "Address: low-level static call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        require(isContract(target), "Address: static call to non-contract");

        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data
    ) internal returns (bytes memory) {
        return
            functionDelegateCall(
                target,
                data,
                "Address: low-level delegate call failed"
            );
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(isContract(target), "Address: delegate call to non-contract");

        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResult(success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verifies that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            // Look for revert reason and bubble it up if present
            if (returndata.length > 0) {
                // The easiest way to bubble the revert reason is using memory via assembly

                assembly {
                    let returndata_size := mload(returndata)
                    revert(add(32, returndata), returndata_size)
                }
            } else {
                revert(errorMessage);
            }
        }
    }
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

/*
 * @dev Provides information about the current execution context, including the
 * sender of the transaction and its data. While these are generally available
 * via msg.sender and msg.data, they should not be accessed in such a direct
 * manner, since when dealing with GSN meta-transactions the account sending and
 * paying for execution may not be the actual sender (as far as an application
 * is concerned).
 *
 * This contract is only required for intermediate, library-like contracts.
 */
abstract contract Context {
    function _msgSender() internal view virtual returns (address payable) {
        return payable(msg.sender);
    }

    function _msgData() internal view virtual returns (bytes memory) {
        this; // silence state mutability warning without generating bytecode - see https://github.com/ethereum/solidity/issues/2691
        return msg.data;
    }
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `recipient`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(
        address owner,
        address spender
    ) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `sender` to `recipient` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(
        address sender,
        address recipient,
        uint256 amount
    ) external returns (bool);

    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(
        address indexed owner,
        address indexed spender,
        uint256 value
    );
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

import {IERC20} from "./IERC20.sol";

interface IERC20Detailed is IERC20 {
    function name() external view returns (string memory);

    function symbol() external view returns (string memory);

    function decimals() external view returns (uint8);
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

import "./Context.sol";

/**
 * @dev Contract module which provides a basic access control mechanism, where
 * there is an account (an owner) that can be granted exclusive access to
 * specific functions.
 *
 * By default, the owner account will be the one that deploys the contract. This
 * can later be changed with {transferOwnership}.
 *
 * This module is used through inheritance. It will make available the modifier
 * `onlyOwner`, which can be applied to your functions to restrict their use to
 * the owner.
 */
contract Ownable is Context {
    address private _owner;

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );

    /**
     * @dev Initializes the contract setting the deployer as the initial owner.
     */
    constructor() {
        address msgSender = _msgSender();
        _owner = msgSender;
        emit OwnershipTransferred(address(0), msgSender);
    }

    /**
     * @dev Returns the address of the current owner.
     */
    function owner() public view returns (address) {
        return _owner;
    }

    /**
     * @dev Throws if called by any account other than the owner.
     */
    modifier onlyOwner() {
        require(_owner == _msgSender(), "Ownable: caller is not the owner");
        _;
    }

    /**
     * @dev Leaves the contract without owner. It will not be possible to call
     * `onlyOwner` functions anymore. Can only be called by the current owner.
     *
     * NOTE: Renouncing ownership will leave the contract without an owner,
     * thereby removing any functionality that is only available to the owner.
     */
    function renounceOwnership() public virtual onlyOwner {
        emit OwnershipTransferred(_owner, address(0));
        _owner = address(0);
    }

    /**
     * @dev Transfers ownership of the contract to a new account (`newOwner`).
     * Can only be called by the current owner.
     */
    function transferOwnership(address newOwner) public virtual onlyOwner {
        require(
            newOwner != address(0),
            "Ownable: new owner is the zero address"
        );
        emit OwnershipTransferred(_owner, newOwner);
        _owner = newOwner;
    }
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

// OpenZeppelin Contracts v4.4.1 (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "./IERC20.sol";
import "./Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transfer.selector, to, value)
        );
    }

    function safeTransferFrom(
        IERC20 token,
        address from,
        address to,
        uint256 value
    ) internal {
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.transferFrom.selector, from, to, value)
        );
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(token.approve.selector, spender, value)
        );
    }

    function safeIncreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        uint256 newAllowance = token.allowance(address(this), spender) + value;
        _callOptionalReturn(
            token,
            abi.encodeWithSelector(
                token.approve.selector,
                spender,
                newAllowance
            )
        );
    }

    function safeDecreaseAllowance(
        IERC20 token,
        address spender,
        uint256 value
    ) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(
                oldAllowance >= value,
                "SafeERC20: decreased allowance below zero"
            );
            uint256 newAllowance = oldAllowance - value;
            _callOptionalReturn(
                token,
                abi.encodeWithSelector(
                    token.approve.selector,
                    spender,
                    newAllowance
                )
            );
        }
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address.functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(
            data,
            "SafeERC20: low-level call failed"
        );
        if (returndata.length > 0) {
            // Return data is optional
            require(
                abi.decode(returndata, (bool)),
                "SafeERC20: ERC20 operation did not succeed"
            );
        }
    }
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

import {IERC20} from "../dependencies/openzeppelin/contracts/IERC20.sol";

/**
 * @title IERC20WithPermit
 * @author Aave
 * @notice Interface for the permit function (EIP-2612)
 */
interface IERC20WithPermit is IERC20 {
    /**
     * @notice Allow passing a signed message to approve spending
     * @dev implements the permit function as for
     * https://github.com/ethereum/EIPs/blob/8a34d644aacf0f9f8f00815307fd7dd5da07655f/EIPS/eip-2612.md
     * @param owner The owner of the funds
     * @param spender The spender
     * @param value The amount
     * @param deadline The deadline timestamp, type(uint256).max for max deadline
     * @param v Signature param
     * @param s Signature param
     * @param r Signature param
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

import {IPoolAddressesProvider} from "./IPoolAddressesProvider.sol";
import {DataTypes} from "../protocol/libraries/types/DataTypes.sol";

/**
 * @title IPool
 * @author Aave
 * @notice Defines the basic interface for an Aave Pool.
 */
interface IPool {
    /**
     * @dev Emitted on mintUnbacked()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address initiating the supply
     * @param onBehalfOf The beneficiary of the supplied assets, receiving the aTokens
     * @param amount The amount of supplied assets
     * @param referralCode The referral code used
     */
    event MintUnbacked(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        uint16 indexed referralCode
    );

    /**
     * @dev Emitted on backUnbacked()
     * @param reserve The address of the underlying asset of the reserve
     * @param backer The address paying for the backing
     * @param amount The amount added as backing
     * @param fee The amount paid in fees
     */
    event BackUnbacked(
        address indexed reserve,
        address indexed backer,
        uint256 amount,
        uint256 fee
    );

    /**
     * @dev Emitted on supply()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address initiating the supply
     * @param onBehalfOf The beneficiary of the supply, receiving the aTokens
     * @param amount The amount supplied
     * @param referralCode The referral code used
     */
    event Supply(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        uint16 indexed referralCode
    );

    /**
     * @dev Emitted on withdraw()
     * @param reserve The address of the underlying asset being withdrawn
     * @param user The address initiating the withdrawal, owner of aTokens
     * @param to The address that will receive the underlying
     * @param amount The amount to be withdrawn
     */
    event Withdraw(
        address indexed reserve,
        address indexed user,
        address indexed to,
        uint256 amount
    );

    /**
     * @dev Emitted on borrow() and flashLoan() when debt needs to be opened
     * @param reserve The address of the underlying asset being borrowed
     * @param user The address of the user initiating the borrow(), receiving the funds on borrow() or just
     * initiator of the transaction on flashLoan()
     * @param onBehalfOf The address that will be getting the debt
     * @param amount The amount borrowed out
     * @param interestRateMode The rate mode: 1 for Stable, 2 for Variable
     * @param borrowRate The numeric rate at which the user has borrowed, expressed in ray
     * @param referralCode The referral code used
     */
    event Borrow(
        address indexed reserve,
        address user,
        address indexed onBehalfOf,
        uint256 amount,
        DataTypes.InterestRateMode interestRateMode,
        uint256 borrowRate,
        uint16 indexed referralCode
    );

    /**
     * @dev Emitted on repay()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The beneficiary of the repayment, getting his debt reduced
     * @param repayer The address of the user initiating the repay(), providing the funds
     * @param amount The amount repaid
     * @param useATokens True if the repayment is done using aTokens, `false` if done with underlying asset directly
     */
    event Repay(
        address indexed reserve,
        address indexed user,
        address indexed repayer,
        uint256 amount,
        bool useATokens
    );

    /**
     * @dev Emitted on swapBorrowRateMode()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user swapping his rate mode
     * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
     */
    event SwapBorrowRateMode(
        address indexed reserve,
        address indexed user,
        DataTypes.InterestRateMode interestRateMode
    );

    /**
     * @dev Emitted on borrow(), repay() and liquidationCall() when using isolated assets
     * @param asset The address of the underlying asset of the reserve
     * @param totalDebt The total isolation mode debt for the reserve
     */
    event IsolationModeTotalDebtUpdated(
        address indexed asset,
        uint256 totalDebt
    );

    /**
     * @dev Emitted when the user selects a certain asset category for eMode
     * @param user The address of the user
     * @param categoryId The category id
     */
    event UserEModeSet(address indexed user, uint8 categoryId);

    /**
     * @dev Emitted on setUserUseReserveAsCollateral()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user enabling the usage as collateral
     */
    event ReserveUsedAsCollateralEnabled(
        address indexed reserve,
        address indexed user
    );

    /**
     * @dev Emitted on setUserUseReserveAsCollateral()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user enabling the usage as collateral
     */
    event ReserveUsedAsCollateralDisabled(
        address indexed reserve,
        address indexed user
    );

    /**
     * @dev Emitted on rebalanceStableBorrowRate()
     * @param reserve The address of the underlying asset of the reserve
     * @param user The address of the user for which the rebalance has been executed
     */
    event RebalanceStableBorrowRate(
        address indexed reserve,
        address indexed user
    );

    /**
     * @dev Emitted on flashLoan()
     * @param target The address of the flash loan receiver contract
     * @param initiator The address initiating the flash loan
     * @param asset The address of the asset being flash borrowed
     * @param amount The amount flash borrowed
     * @param interestRateMode The flashloan mode: 0 for regular flashloan, 1 for Stable debt, 2 for Variable debt
     * @param premium The fee flash borrowed
     * @param referralCode The referral code used
     */
    event FlashLoan(
        address indexed target,
        address initiator,
        address indexed asset,
        uint256 amount,
        DataTypes.InterestRateMode interestRateMode,
        uint256 premium,
        uint16 indexed referralCode
    );

    /**
     * @dev Emitted when a borrower is liquidated.
     * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
     * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
     * @param user The address of the borrower getting liquidated
     * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
     * @param liquidatedCollateralAmount The amount of collateral received by the liquidator
     * @param liquidator The address of the liquidator
     * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
     * to receive the underlying collateral asset directly
     */
    event LiquidationCall(
        address indexed collateralAsset,
        address indexed debtAsset,
        address indexed user,
        uint256 debtToCover,
        uint256 liquidatedCollateralAmount,
        address liquidator,
        bool receiveAToken
    );

    /**
     * @dev Emitted when the state of a reserve is updated.
     * @param reserve The address of the underlying asset of the reserve
     * @param liquidityRate The next liquidity rate
     * @param stableBorrowRate The next stable borrow rate
     * @param variableBorrowRate The next variable borrow rate
     * @param liquidityIndex The next liquidity index
     * @param variableBorrowIndex The next variable borrow index
     */
    event ReserveDataUpdated(
        address indexed reserve,
        uint256 liquidityRate,
        uint256 stableBorrowRate,
        uint256 variableBorrowRate,
        uint256 liquidityIndex,
        uint256 variableBorrowIndex
    );

    /**
     * @dev Emitted when the protocol treasury receives minted aTokens from the accrued interest.
     * @param reserve The address of the reserve
     * @param amountMinted The amount minted to the treasury
     */
    event MintedToTreasury(address indexed reserve, uint256 amountMinted);

    /**
     * @notice Mints an `amount` of aTokens to the `onBehalfOf`
     * @param asset The address of the underlying asset to mint
     * @param amount The amount to mint
     * @param onBehalfOf The address that will receive the aTokens
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     */
    function mintUnbacked(
        address asset,
        uint256 amount,
        address onBehalfOf,
        uint16 referralCode
    ) external;

    /**
     * @notice Back the current unbacked underlying with `amount` and pay `fee`.
     * @param asset The address of the underlying asset to back
     * @param amount The amount to back
     * @param fee The amount paid in fees
     * @return The backed amount
     */
    function backUnbacked(
        address asset,
        uint256 amount,
        uint256 fee
    ) external returns (uint256);

    /**
     * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
     * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
     * @param asset The address of the underlying asset to supply
     * @param amount The amount to be supplied
     * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
     *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
     *   is a different wallet
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     */
    function supply(
        address asset,
        uint256 amount,
        address onBehalfOf,
        uint16 referralCode
    ) external;

    /**
     * @notice Supply with transfer approval of asset to be supplied done via permit function
     * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
     * @param asset The address of the underlying asset to supply
     * @param amount The amount to be supplied
     * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
     *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
     *   is a different wallet
     * @param deadline The deadline timestamp that the permit is valid
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     * @param permitV The V parameter of ERC712 permit sig
     * @param permitR The R parameter of ERC712 permit sig
     * @param permitS The S parameter of ERC712 permit sig
     */
    function supplyWithPermit(
        address asset,
        uint256 amount,
        address onBehalfOf,
        uint16 referralCode,
        uint256 deadline,
        uint8 permitV,
        bytes32 permitR,
        bytes32 permitS
    ) external;

    /**
     * @notice Withdraws an `amount` of underlying asset from the reserve, burning the equivalent aTokens owned
     * E.g. User has 100 aUSDC, calls withdraw() and receives 100 USDC, burning the 100 aUSDC
     * @param asset The address of the underlying asset to withdraw
     * @param amount The underlying amount to be withdrawn
     *   - Send the value type(uint256).max in order to withdraw the whole aToken balance
     * @param to The address that will receive the underlying, same as msg.sender if the user
     *   wants to receive it on his own wallet, or a different address if the beneficiary is a
     *   different wallet
     * @return The final amount withdrawn
     */
    function withdraw(
        address asset,
        uint256 amount,
        address to
    ) external returns (uint256);

    /**
     * @notice Allows users to borrow a specific `amount` of the reserve underlying asset, provided that the borrower
     * already supplied enough collateral, or he was given enough allowance by a credit delegator on the
     * corresponding debt token (StableDebtToken or VariableDebtToken)
     * - E.g. User borrows 100 USDC passing as `onBehalfOf` his own address, receiving the 100 USDC in his wallet
     *   and 100 stable/variable debt tokens, depending on the `interestRateMode`
     * @param asset The address of the underlying asset to borrow
     * @param amount The amount to be borrowed
     * @param interestRateMode The interest rate mode at which the user wants to borrow: 1 for Stable, 2 for Variable
     * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     * @param onBehalfOf The address of the user who will receive the debt. Should be the address of the borrower itself
     * calling the function if he wants to borrow against his own collateral, or the address of the credit delegator
     * if he has been given credit delegation allowance
     */
    function borrow(
        address asset,
        uint256 amount,
        uint256 interestRateMode,
        uint16 referralCode,
        address onBehalfOf
    ) external;

    /**
     * @notice Repays a borrowed `amount` on a specific reserve, burning the equivalent debt tokens owned
     * - E.g. User repays 100 USDC, burning 100 variable/stable debt tokens of the `onBehalfOf` address
     * @param asset The address of the borrowed underlying asset previously borrowed
     * @param amount The amount to repay
     * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
     * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
     * @param onBehalfOf The address of the user who will get his debt reduced/removed. Should be the address of the
     * user calling the function if he wants to reduce/remove his own debt, or the address of any other
     * other borrower whose debt should be removed
     * @return The final amount repaid
     */
    function repay(
        address asset,
        uint256 amount,
        uint256 interestRateMode,
        address onBehalfOf
    ) external returns (uint256);

    /**
     * @notice Repay with transfer approval of asset to be repaid done via permit function
     * see: https://eips.ethereum.org/EIPS/eip-2612 and https://eips.ethereum.org/EIPS/eip-713
     * @param asset The address of the borrowed underlying asset previously borrowed
     * @param amount The amount to repay
     * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
     * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
     * @param onBehalfOf Address of the user who will get his debt reduced/removed. Should be the address of the
     * user calling the function if he wants to reduce/remove his own debt, or the address of any other
     * other borrower whose debt should be removed
     * @param deadline The deadline timestamp that the permit is valid
     * @param permitV The V parameter of ERC712 permit sig
     * @param permitR The R parameter of ERC712 permit sig
     * @param permitS The S parameter of ERC712 permit sig
     * @return The final amount repaid
     */
    function repayWithPermit(
        address asset,
        uint256 amount,
        uint256 interestRateMode,
        address onBehalfOf,
        uint256 deadline,
        uint8 permitV,
        bytes32 permitR,
        bytes32 permitS
    ) external returns (uint256);

    /**
     * @notice Repays a borrowed `amount` on a specific reserve using the reserve aTokens, burning the
     * equivalent debt tokens
     * - E.g. User repays 100 USDC using 100 aUSDC, burning 100 variable/stable debt tokens
     * @dev  Passing uint256.max as amount will clean up any residual aToken dust balance, if the user aToken
     * balance is not enough to cover the whole debt
     * @param asset The address of the borrowed underlying asset previously borrowed
     * @param amount The amount to repay
     * - Send the value type(uint256).max in order to repay the whole debt for `asset` on the specific `debtMode`
     * @param interestRateMode The interest rate mode at of the debt the user wants to repay: 1 for Stable, 2 for Variable
     * @return The final amount repaid
     */
    function repayWithATokens(
        address asset,
        uint256 amount,
        uint256 interestRateMode
    ) external returns (uint256);

    /**
     * @notice Allows a borrower to swap his debt between stable and variable mode, or vice versa
     * @param asset The address of the underlying asset borrowed
     * @param interestRateMode The current interest rate mode of the position being swapped: 1 for Stable, 2 for Variable
     */
    function swapBorrowRateMode(
        address asset,
        uint256 interestRateMode
    ) external;

    /**
     * @notice Rebalances the stable interest rate of a user to the current stable rate defined on the reserve.
     * - Users can be rebalanced if the following conditions are satisfied:
     *     1. Usage ratio is above 95%
     *     2. the current supply APY is below REBALANCE_UP_THRESHOLD * maxVariableBorrowRate, which means that too
     *        much has been borrowed at a stable rate and suppliers are not earning enough
     * @param asset The address of the underlying asset borrowed
     * @param user The address of the user to be rebalanced
     */
    function rebalanceStableBorrowRate(address asset, address user) external;

    /**
     * @notice Allows suppliers to enable/disable a specific supplied asset as collateral
     * @param asset The address of the underlying asset supplied
     * @param useAsCollateral True if the user wants to use the supply as collateral, false otherwise
     */
    function setUserUseReserveAsCollateral(
        address asset,
        bool useAsCollateral
    ) external;

    /**
     * @notice Function to liquidate a non-healthy position collateral-wise, with Health Factor below 1
     * - The caller (liquidator) covers `debtToCover` amount of debt of the user getting liquidated, and receives
     *   a proportionally amount of the `collateralAsset` plus a bonus to cover market risk
     * @param collateralAsset The address of the underlying asset used as collateral, to receive as result of the liquidation
     * @param debtAsset The address of the underlying borrowed asset to be repaid with the liquidation
     * @param user The address of the borrower getting liquidated
     * @param debtToCover The debt amount of borrowed `asset` the liquidator wants to cover
     * @param receiveAToken True if the liquidators wants to receive the collateral aTokens, `false` if he wants
     * to receive the underlying collateral asset directly
     */
    function liquidationCall(
        address collateralAsset,
        address debtAsset,
        address user,
        uint256 debtToCover,
        bool receiveAToken
    ) external;

    /**
     * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
     * as long as the amount taken plus a fee is returned.
     * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
     * into consideration. For further details please visit https://docs.aave.com/developers/
     * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanReceiver interface
     * @param assets The addresses of the assets being flash-borrowed
     * @param amounts The amounts of the assets being flash-borrowed
     * @param interestRateModes Types of the debt to open if the flash loan is not returned:
     *   0 -> Don't open any debt, just revert if funds can't be transferred from the receiver
     *   1 -> Open debt at stable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     *   2 -> Open debt at variable rate for the value of the amount flash-borrowed to the `onBehalfOf` address
     * @param onBehalfOf The address  that will receive the debt in the case of using on `modes` 1 or 2
     * @param params Variadic packed params to pass to the receiver as extra information
     * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     */
    function flashLoan(
        address receiverAddress,
        address[] calldata assets,
        uint256[] calldata amounts,
        uint256[] calldata interestRateModes,
        address onBehalfOf,
        bytes calldata params,
        uint16 referralCode
    ) external;

    /**
     * @notice Allows smartcontracts to access the liquidity of the pool within one transaction,
     * as long as the amount taken plus a fee is returned.
     * @dev IMPORTANT There are security concerns for developers of flashloan receiver contracts that must be kept
     * into consideration. For further details please visit https://docs.aave.com/developers/
     * @param receiverAddress The address of the contract receiving the funds, implementing IFlashLoanSimpleReceiver interface
     * @param asset The address of the asset being flash-borrowed
     * @param amount The amount of the asset being flash-borrowed
     * @param params Variadic packed params to pass to the receiver as extra information
     * @param referralCode The code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     */
    function flashLoanSimple(
        address receiverAddress,
        address asset,
        uint256 amount,
        bytes calldata params,
        uint16 referralCode
    ) external;

    /**
     * @notice Returns the user account data across all the reserves
     * @param user The address of the user
     * @return totalCollateralBase The total collateral of the user in the base currency used by the price feed
     * @return totalDebtBase The total debt of the user in the base currency used by the price feed
     * @return availableBorrowsBase The borrowing power left of the user in the base currency used by the price feed
     * @return currentLiquidationThreshold The liquidation threshold of the user
     * @return ltv The loan to value of The user
     * @return healthFactor The current health factor of the user
     */
    function getUserAccountData(
        address user
    )
        external
        view
        returns (
            uint256 totalCollateralBase,
            uint256 totalDebtBase,
            uint256 availableBorrowsBase,
            uint256 currentLiquidationThreshold,
            uint256 ltv,
            uint256 healthFactor
        );

    /**
     * @notice Initializes a reserve, activating it, assigning an aToken and debt tokens and an
     * interest rate strategy
     * @dev Only callable by the PoolConfigurator contract
     * @param asset The address of the underlying asset of the reserve
     * @param aTokenAddress The address of the aToken that will be assigned to the reserve
     * @param stableDebtAddress The address of the StableDebtToken that will be assigned to the reserve
     * @param variableDebtAddress The address of the VariableDebtToken that will be assigned to the reserve
     * @param interestRateStrategyAddress The address of the interest rate strategy contract
     */
    function initReserve(
        address asset,
        address aTokenAddress,
        address stableDebtAddress,
        address variableDebtAddress,
        address interestRateStrategyAddress
    ) external;

    /**
     * @notice Drop a reserve
     * @dev Only callable by the PoolConfigurator contract
     * @param asset The address of the underlying asset of the reserve
     */
    function dropReserve(address asset) external;

    /**
     * @notice Updates the address of the interest rate strategy contract
     * @dev Only callable by the PoolConfigurator contract
     * @param asset The address of the underlying asset of the reserve
     * @param rateStrategyAddress The address of the interest rate strategy contract
     */
    function setReserveInterestRateStrategyAddress(
        address asset,
        address rateStrategyAddress
    ) external;

    /**
     * @notice Sets the configuration bitmap of the reserve as a whole
     * @dev Only callable by the PoolConfigurator contract
     * @param asset The address of the underlying asset of the reserve
     * @param configuration The new configuration bitmap
     */
    function setConfiguration(
        address asset,
        DataTypes.ReserveConfigurationMap calldata configuration
    ) external;

    /**
     * @notice Returns the configuration of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The configuration of the reserve
     */
    function getConfiguration(
        address asset
    ) external view returns (DataTypes.ReserveConfigurationMap memory);

    /**
     * @notice Returns the configuration of the user across all the reserves
     * @param user The user address
     * @return The configuration of the user
     */
    function getUserConfiguration(
        address user
    ) external view returns (DataTypes.UserConfigurationMap memory);

    /**
     * @notice Returns the normalized income of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The reserve's normalized income
     */
    function getReserveNormalizedIncome(
        address asset
    ) external view returns (uint256);

    /**
     * @notice Returns the normalized variable debt per unit of asset
     * @dev WARNING: This function is intended to be used primarily by the protocol itself to get a
     * "dynamic" variable index based on time, current stored index and virtual rate at the current
     * moment (approx. a borrower would get if opening a position). This means that is always used in
     * combination with variable debt supply/balances.
     * If using this function externally, consider that is possible to have an increasing normalized
     * variable debt that is not equivalent to how the variable debt index would be updated in storage
     * (e.g. only updates with non-zero variable debt supply)
     * @param asset The address of the underlying asset of the reserve
     * @return The reserve normalized variable debt
     */
    function getReserveNormalizedVariableDebt(
        address asset
    ) external view returns (uint256);

    /**
     * @notice Returns the state and configuration of the reserve
     * @param asset The address of the underlying asset of the reserve
     * @return The state and configuration data of the reserve
     */
    function getReserveData(
        address asset
    ) external view returns (DataTypes.ReserveData memory);

    /**
     * @notice Validates and finalizes an aToken transfer
     * @dev Only callable by the overlying aToken of the `asset`
     * @param asset The address of the underlying asset of the aToken
     * @param from The user from which the aTokens are transferred
     * @param to The user receiving the aTokens
     * @param amount The amount being transferred/withdrawn
     * @param balanceFromBefore The aToken balance of the `from` user before the transfer
     * @param balanceToBefore The aToken balance of the `to` user before the transfer
     */
    function finalizeTransfer(
        address asset,
        address from,
        address to,
        uint256 amount,
        uint256 balanceFromBefore,
        uint256 balanceToBefore
    ) external;

    /**
     * @notice Returns the list of the underlying assets of all the initialized reserves
     * @dev It does not include dropped reserves
     * @return The addresses of the underlying assets of the initialized reserves
     */
    function getReservesList() external view returns (address[] memory);

    /**
     * @notice Returns the address of the underlying asset of a reserve by the reserve id as stored in the DataTypes.ReserveData struct
     * @param id The id of the reserve as stored in the DataTypes.ReserveData struct
     * @return The address of the reserve associated with id
     */
    function getReserveAddressById(uint16 id) external view returns (address);

    /**
     * @notice Returns the PoolAddressesProvider connected to this contract
     * @return The address of the PoolAddressesProvider
     */
    function ADDRESSES_PROVIDER()
        external
        view
        returns (IPoolAddressesProvider);

    /**
     * @notice Updates the protocol fee on the bridging
     * @param bridgeProtocolFee The part of the premium sent to the protocol treasury
     */
    function updateBridgeProtocolFee(uint256 bridgeProtocolFee) external;

    /**
     * @notice Updates flash loan premiums. Flash loan premium consists of two parts:
     * - A part is sent to aToken holders as extra, one time accumulated interest
     * - A part is collected by the protocol treasury
     * @dev The total premium is calculated on the total borrowed amount
     * @dev The premium to protocol is calculated on the total premium, being a percentage of `flashLoanPremiumTotal`
     * @dev Only callable by the PoolConfigurator contract
     * @param flashLoanPremiumTotal The total premium, expressed in bps
     * @param flashLoanPremiumToProtocol The part of the premium sent to the protocol treasury, expressed in bps
     */
    function updateFlashloanPremiums(
        uint128 flashLoanPremiumTotal,
        uint128 flashLoanPremiumToProtocol
    ) external;

    /**
     * @notice Configures a new category for the eMode.
     * @dev In eMode, the protocol allows very high borrowing power to borrow assets of the same category.
     * The category 0 is reserved as it's the default for volatile assets
     * @param id The id of the category
     * @param config The configuration of the category
     */
    function configureEModeCategory(
        uint8 id,
        DataTypes.EModeCategory memory config
    ) external;

    /**
     * @notice Returns the data of an eMode category
     * @param id The id of the category
     * @return The configuration data of the category
     */
    function getEModeCategoryData(
        uint8 id
    ) external view returns (DataTypes.EModeCategory memory);

    /**
     * @notice Allows a user to use the protocol in eMode
     * @param categoryId The id of the category
     */
    function setUserEMode(uint8 categoryId) external;

    /**
     * @notice Returns the eMode the user is using
     * @param user The address of the user
     * @return The eMode id
     */
    function getUserEMode(address user) external view returns (uint256);

    /**
     * @notice Resets the isolation mode total debt of the given asset to zero
     * @dev It requires the given asset has zero debt ceiling
     * @param asset The address of the underlying asset to reset the isolationModeTotalDebt
     */
    function resetIsolationModeTotalDebt(address asset) external;

    /**
     * @notice Returns the percentage of available liquidity that can be borrowed at once at stable rate
     * @return The percentage of available liquidity to borrow, expressed in bps
     */
    function MAX_STABLE_RATE_BORROW_SIZE_PERCENT()
        external
        view
        returns (uint256);

    /**
     * @notice Returns the total fee on flash loans
     * @return The total fee on flashloans
     */
    function FLASHLOAN_PREMIUM_TOTAL() external view returns (uint128);

    /**
     * @notice Returns the part of the bridge fees sent to protocol
     * @return The bridge fee sent to the protocol treasury
     */
    function BRIDGE_PROTOCOL_FEE() external view returns (uint256);

    /**
     * @notice Returns the part of the flashloan fees sent to protocol
     * @return The flashloan fee sent to the protocol treasury
     */
    function FLASHLOAN_PREMIUM_TO_PROTOCOL() external view returns (uint128);

    /**
     * @notice Returns the maximum number of reserves supported to be listed in this Pool
     * @return The maximum number of reserves supported
     */
    function MAX_NUMBER_RESERVES() external view returns (uint16);

    /**
     * @notice Mints the assets accrued through the reserve factor to the treasury in the form of aTokens
     * @param assets The list of reserves for which the minting needs to be executed
     */
    function mintToTreasury(address[] calldata assets) external;

    /**
     * @notice Rescue and transfer tokens locked in this contract
     * @param token The address of the token
     * @param to The address of the recipient
     * @param amount The amount of token to transfer
     */
    function rescueTokens(address token, address to, uint256 amount) external;

    /**
     * @notice Supplies an `amount` of underlying asset into the reserve, receiving in return overlying aTokens.
     * - E.g. User supplies 100 USDC and gets in return 100 aUSDC
     * @dev Deprecated: Use the `supply` function instead
     * @param asset The address of the underlying asset to supply
     * @param amount The amount to be supplied
     * @param onBehalfOf The address that will receive the aTokens, same as msg.sender if the user
     *   wants to receive them on his own wallet, or a different address if the beneficiary of aTokens
     *   is a different wallet
     * @param referralCode Code used to register the integrator originating the operation, for potential rewards.
     *   0 if the action is executed directly by the user, without any middle-man
     */
    function deposit(
        address asset,
        uint256 amount,
        address onBehalfOf,
        uint16 referralCode
    ) external;
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

/**
 * @title IPoolAddressesProvider
 * @author Aave
 * @notice Defines the basic interface for a Pool Addresses Provider.
 */
interface IPoolAddressesProvider {
    /**
     * @dev Emitted when the market identifier is updated.
     * @param oldMarketId The old id of the market
     * @param newMarketId The new id of the market
     */
    event MarketIdSet(string indexed oldMarketId, string indexed newMarketId);

    /**
     * @dev Emitted when the pool is updated.
     * @param oldAddress The old address of the Pool
     * @param newAddress The new address of the Pool
     */
    event PoolUpdated(address indexed oldAddress, address indexed newAddress);

    /**
     * @dev Emitted when the pool configurator is updated.
     * @param oldAddress The old address of the PoolConfigurator
     * @param newAddress The new address of the PoolConfigurator
     */
    event PoolConfiguratorUpdated(
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when the price oracle is updated.
     * @param oldAddress The old address of the PriceOracle
     * @param newAddress The new address of the PriceOracle
     */
    event PriceOracleUpdated(
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when the ACL manager is updated.
     * @param oldAddress The old address of the ACLManager
     * @param newAddress The new address of the ACLManager
     */
    event ACLManagerUpdated(
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when the ACL admin is updated.
     * @param oldAddress The old address of the ACLAdmin
     * @param newAddress The new address of the ACLAdmin
     */
    event ACLAdminUpdated(
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when the price oracle sentinel is updated.
     * @param oldAddress The old address of the PriceOracleSentinel
     * @param newAddress The new address of the PriceOracleSentinel
     */
    event PriceOracleSentinelUpdated(
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when the pool data provider is updated.
     * @param oldAddress The old address of the PoolDataProvider
     * @param newAddress The new address of the PoolDataProvider
     */
    event PoolDataProviderUpdated(
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when a new proxy is created.
     * @param id The identifier of the proxy
     * @param proxyAddress The address of the created proxy contract
     * @param implementationAddress The address of the implementation contract
     */
    event ProxyCreated(
        bytes32 indexed id,
        address indexed proxyAddress,
        address indexed implementationAddress
    );

    /**
     * @dev Emitted when a new non-proxied contract address is registered.
     * @param id The identifier of the contract
     * @param oldAddress The address of the old contract
     * @param newAddress The address of the new contract
     */
    event AddressSet(
        bytes32 indexed id,
        address indexed oldAddress,
        address indexed newAddress
    );

    /**
     * @dev Emitted when the implementation of the proxy registered with id is updated
     * @param id The identifier of the contract
     * @param proxyAddress The address of the proxy contract
     * @param oldImplementationAddress The address of the old implementation contract
     * @param newImplementationAddress The address of the new implementation contract
     */
    event AddressSetAsProxy(
        bytes32 indexed id,
        address indexed proxyAddress,
        address oldImplementationAddress,
        address indexed newImplementationAddress
    );

    /**
     * @notice Returns the id of the Aave market to which this contract points to.
     * @return The market id
     */
    function getMarketId() external view returns (string memory);

    /**
     * @notice Associates an id with a specific PoolAddressesProvider.
     * @dev This can be used to create an onchain registry of PoolAddressesProviders to
     * identify and validate multiple Aave markets.
     * @param newMarketId The market id
     */
    function setMarketId(string calldata newMarketId) external;

    /**
     * @notice Returns an address by its identifier.
     * @dev The returned address might be an EOA or a contract, potentially proxied
     * @dev It returns ZERO if there is no registered address with the given id
     * @param id The id
     * @return The address of the registered for the specified id
     */
    function getAddressFromID(bytes32 id) external view returns (address);

    /**
     * @notice General function to update the implementation of a proxy registered with
     * certain `id`. If there is no proxy registered, it will instantiate one and
     * set as implementation the `newImplementationAddress`.
     * @dev IMPORTANT Use this function carefully, only for ids that don't have an explicit
     * setter function, in order to avoid unexpected consequences
     * @param id The id
     * @param newImplementationAddress The address of the new implementation
     */
    function setAddressAsProxy(
        bytes32 id,
        address newImplementationAddress
    ) external;

    /**
     * @notice Sets an address for an id replacing the address saved in the addresses map.
     * @dev IMPORTANT Use this function carefully, as it will do a hard replacement
     * @param id The id
     * @param newAddress The address to set
     */
    function setAddress(bytes32 id, address newAddress) external;

    /**
     * @notice Returns the address of the Pool proxy.
     * @return The Pool proxy address
     */
    function getPool() external view returns (address);

    /**
     * @notice Updates the implementation of the Pool, or creates a proxy
     * setting the new `pool` implementation when the function is called for the first time.
     * @param newPoolImpl The new Pool implementation
     */
    function setPoolImpl(address newPoolImpl) external;

    /**
     * @notice Returns the address of the PoolConfigurator proxy.
     * @return The PoolConfigurator proxy address
     */
    function getPoolConfigurator() external view returns (address);

    /**
     * @notice Updates the implementation of the PoolConfigurator, or creates a proxy
     * setting the new `PoolConfigurator` implementation when the function is called for the first time.
     * @param newPoolConfiguratorImpl The new PoolConfigurator implementation
     */
    function setPoolConfiguratorImpl(address newPoolConfiguratorImpl) external;

    /**
     * @notice Returns the address of the price oracle.
     * @return The address of the PriceOracle
     */
    function getPriceOracle() external view returns (address);

    /**
     * @notice Updates the address of the price oracle.
     * @param newPriceOracle The address of the new PriceOracle
     */
    function setPriceOracle(address newPriceOracle) external;

    /**
     * @notice Returns the address of the ACL manager.
     * @return The address of the ACLManager
     */
    function getACLManager() external view returns (address);

    /**
     * @notice Updates the address of the ACL manager.
     * @param newAclManager The address of the new ACLManager
     */
    function setACLManager(address newAclManager) external;

    /**
     * @notice Returns the address of the ACL admin.
     * @return The address of the ACL admin
     */
    function getACLAdmin() external view returns (address);

    /**
     * @notice Updates the address of the ACL admin.
     * @param newAclAdmin The address of the new ACL admin
     */
    function setACLAdmin(address newAclAdmin) external;

    /**
     * @notice Returns the address of the price oracle sentinel.
     * @return The address of the PriceOracleSentinel
     */
    function getPriceOracleSentinel() external view returns (address);

    /**
     * @notice Updates the address of the price oracle sentinel.
     * @param newPriceOracleSentinel The address of the new PriceOracleSentinel
     */
    function setPriceOracleSentinel(address newPriceOracleSentinel) external;

    /**
     * @notice Returns the address of the data provider.
     * @return The address of the DataProvider
     */
    function getPoolDataProvider() external view returns (address);

    /**
     * @notice Updates the address of the data provider.
     * @param newDataProvider The address of the new DataProvider
     */
    function setPoolDataProvider(address newDataProvider) external;
}

// SPDX-License-Identifier: BUSL-1.1
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

/**
 * @title PercentageMath library
 * @author Aave
 * @notice Provides functions to perform percentage calculations
 * @dev Percentages are defined by default with 2 decimals of precision (100.00). The precision is indicated by PERCENTAGE_FACTOR
 * @dev Operations are rounded. If a value is >=.5, will be rounded up, otherwise rounded down.
 */
library PercentageMath {
    // Maximum percentage factor (100.00%)
    uint256 internal constant PERCENTAGE_FACTOR = 1e4;

    // Half percentage factor (50.00%)
    uint256 internal constant HALF_PERCENTAGE_FACTOR = 0.5e4;

    /**
     * @notice Executes a percentage multiplication
     * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
     * @param value The value of which the percentage needs to be calculated
     * @param percentage The percentage of the value to be calculated
     * @return result value percentmul percentage
     */
    function percentMul(
        uint256 value,
        uint256 percentage
    ) internal pure returns (uint256 result) {
        // to avoid overflow, value <= (type(uint256).max - HALF_PERCENTAGE_FACTOR) / percentage
        assembly {
            if iszero(
                or(
                    iszero(percentage),
                    iszero(
                        gt(
                            value,
                            div(sub(not(0), HALF_PERCENTAGE_FACTOR), percentage)
                        )
                    )
                )
            ) {
                revert(0, 0)
            }

            result := div(
                add(mul(value, percentage), HALF_PERCENTAGE_FACTOR),
                PERCENTAGE_FACTOR
            )
        }
    }

    /**
     * @notice Executes a percentage division
     * @dev assembly optimized for improved gas savings, see https://twitter.com/transmissions11/status/1451131036377571328
     * @param value The value of which the percentage needs to be calculated
     * @param percentage The percentage of the value to be calculated
     * @return result value percentdiv percentage
     */
    function percentDiv(
        uint256 value,
        uint256 percentage
    ) internal pure returns (uint256 result) {
        // to avoid overflow, value <= (type(uint256).max - halfPercentage) / PERCENTAGE_FACTOR
        assembly {
            if or(
                iszero(percentage),
                iszero(
                    iszero(
                        gt(
                            value,
                            div(
                                sub(not(0), div(percentage, 2)),
                                PERCENTAGE_FACTOR
                            )
                        )
                    )
                )
            ) {
                revert(0, 0)
            }

            result := div(
                add(mul(value, PERCENTAGE_FACTOR), div(percentage, 2)),
                percentage
            )
        }
    }
}

// SPDX-License-Identifier: BUSL-1.1
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.0;

library DataTypes {
    struct ReserveData {
        //stores the reserve configuration
        ReserveConfigurationMap configuration;
        //the liquidity index. Expressed in ray
        uint128 liquidityIndex;
        //the current supply rate. Expressed in ray
        uint128 currentLiquidityRate;
        //variable borrow index. Expressed in ray
        uint128 variableBorrowIndex;
        //the current variable borrow rate. Expressed in ray
        uint128 currentVariableBorrowRate;
        //the current stable borrow rate. Expressed in ray
        uint128 currentStableBorrowRate;
        //timestamp of last update
        uint40 lastUpdateTimestamp;
        //the id of the reserve. Represents the position in the list of the active reserves
        uint16 id;
        //aToken address
        address aTokenAddress;
        //stableDebtToken address
        address stableDebtTokenAddress;
        //variableDebtToken address
        address variableDebtTokenAddress;
        //address of the interest rate strategy
        address interestRateStrategyAddress;
        //the current treasury balance, scaled
        uint128 accruedToTreasury;
        //the outstanding unbacked aTokens minted through the bridging feature
        uint128 unbacked;
        //the outstanding debt borrowed against this asset in isolation mode
        uint128 isolationModeTotalDebt;
    }

    struct ReserveConfigurationMap {
        //bit 0-15: LTV
        //bit 16-31: Liq. threshold
        //bit 32-47: Liq. bonus
        //bit 48-55: Decimals
        //bit 56: reserve is active
        //bit 57: reserve is frozen
        //bit 58: borrowing is enabled
        //bit 59: stable rate borrowing enabled
        //bit 60: asset is paused
        //bit 61: borrowing in isolation mode is enabled
        //bit 62: siloed borrowing enabled
        //bit 63: flashloaning enabled
        //bit 64-79: reserve factor
        //bit 80-115 borrow cap in whole tokens, borrowCap == 0 => no cap
        //bit 116-151 supply cap in whole tokens, supplyCap == 0 => no cap
        //bit 152-167 liquidation protocol fee
        //bit 168-175 eMode category
        //bit 176-211 unbacked mint cap in whole tokens, unbackedMintCap == 0 => minting disabled
        //bit 212-251 debt ceiling for isolation mode with (ReserveConfiguration::DEBT_CEILING_DECIMALS) decimals
        //bit 252-255 unused

        uint256 data;
    }

    struct UserConfigurationMap {
        /**
         * @dev Bitmap of the users collaterals and borrows. It is divided in pairs of bits, one pair per asset.
         * The first bit indicates if an asset is used as collateral by the user, the second whether an
         * asset is borrowed by the user.
         */
        uint256 data;
    }

    struct EModeCategory {
        // each eMode category has a custom ltv and liquidation threshold
        uint16 ltv;
        uint16 liquidationThreshold;
        uint16 liquidationBonus;
        // each eMode category may or may not have a custom oracle to override the individual assets price oracles
        address priceSource;
        string label;
    }

    enum InterestRateMode {
        NONE,
        STABLE,
        VARIABLE
    }

    struct ReserveCache {
        uint256 currScaledVariableDebt;
        uint256 nextScaledVariableDebt;
        uint256 currPrincipalStableDebt;
        uint256 currAvgStableBorrowRate;
        uint256 currTotalStableDebt;
        uint256 nextAvgStableBorrowRate;
        uint256 nextTotalStableDebt;
        uint256 currLiquidityIndex;
        uint256 nextLiquidityIndex;
        uint256 currVariableBorrowIndex;
        uint256 nextVariableBorrowIndex;
        uint256 currLiquidityRate;
        uint256 currVariableBorrowRate;
        uint256 reserveFactor;
        ReserveConfigurationMap reserveConfiguration;
        address aTokenAddress;
        address stableDebtTokenAddress;
        address variableDebtTokenAddress;
        uint40 reserveLastUpdateTimestamp;
        uint40 stableDebtLastUpdateTimestamp;
    }

    struct ExecuteLiquidationCallParams {
        uint256 reservesCount;
        uint256 debtToCover;
        address collateralAsset;
        address debtAsset;
        address user;
        bool receiveAToken;
        address priceOracle;
        uint8 userEModeCategory;
        address priceOracleSentinel;
    }

    struct ExecuteSupplyParams {
        address asset;
        uint256 amount;
        address onBehalfOf;
        uint16 referralCode;
    }

    struct ExecuteBorrowParams {
        address asset;
        address user;
        address onBehalfOf;
        uint256 amount;
        InterestRateMode interestRateMode;
        uint16 referralCode;
        bool releaseUnderlying;
        uint256 maxStableRateBorrowSizePercent;
        uint256 reservesCount;
        address oracle;
        uint8 userEModeCategory;
        address priceOracleSentinel;
    }

    struct ExecuteRepayParams {
        address asset;
        uint256 amount;
        InterestRateMode interestRateMode;
        address onBehalfOf;
        bool useATokens;
    }

    struct ExecuteWithdrawParams {
        address asset;
        uint256 amount;
        address to;
        uint256 reservesCount;
        address oracle;
        uint8 userEModeCategory;
    }

    struct ExecuteSetUserEModeParams {
        uint256 reservesCount;
        address oracle;
        uint8 categoryId;
    }

    struct FinalizeTransferParams {
        address asset;
        address from;
        address to;
        uint256 amount;
        uint256 balanceFromBefore;
        uint256 balanceToBefore;
        uint256 reservesCount;
        address oracle;
        uint8 fromEModeCategory;
    }

    struct FlashloanParams {
        address receiverAddress;
        address[] assets;
        uint256[] amounts;
        uint256[] interestRateModes;
        address onBehalfOf;
        bytes params;
        uint16 referralCode;
        uint256 flashLoanPremiumToProtocol;
        uint256 flashLoanPremiumTotal;
        uint256 maxStableRateBorrowSizePercent;
        uint256 reservesCount;
        address addressesProvider;
        uint8 userEModeCategory;
        bool isAuthorizedFlashBorrower;
    }

    struct FlashloanSimpleParams {
        address receiverAddress;
        address asset;
        uint256 amount;
        bytes params;
        uint16 referralCode;
        uint256 flashLoanPremiumToProtocol;
        uint256 flashLoanPremiumTotal;
    }

    struct FlashLoanRepaymentParams {
        uint256 amount;
        uint256 totalPremium;
        uint256 flashLoanPremiumToProtocol;
        address asset;
        address receiverAddress;
        uint16 referralCode;
    }

    struct CalculateUserAccountDataParams {
        UserConfigurationMap userConfig;
        uint256 reservesCount;
        address user;
        address oracle;
        uint8 userEModeCategory;
    }

    struct ValidateBorrowParams {
        ReserveCache reserveCache;
        UserConfigurationMap userConfig;
        address asset;
        address userAddress;
        uint256 amount;
        InterestRateMode interestRateMode;
        uint256 maxStableLoanPercent;
        uint256 reservesCount;
        address oracle;
        uint8 userEModeCategory;
        address priceOracleSentinel;
        bool isolationModeActive;
        address isolationModeCollateralAddress;
        uint256 isolationModeDebtCeiling;
    }

    struct ValidateLiquidationCallParams {
        ReserveCache debtReserveCache;
        uint256 totalDebt;
        uint256 healthFactor;
        address priceOracleSentinel;
    }

    struct CalculateInterestRatesParams {
        uint256 unbacked;
        uint256 liquidityAdded;
        uint256 liquidityTaken;
        uint256 totalStableDebt;
        uint256 totalVariableDebt;
        uint256 averageStableBorrowRate;
        uint256 reserveFactor;
        address reserve;
        address aToken;
    }

    struct InitReserveParams {
        address asset;
        address aTokenAddress;
        address stableDebtAddress;
        address variableDebtAddress;
        address interestRateStrategyAddress;
        uint16 reservesCount;
        uint16 maxNumberReserves;
    }
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.10;

import {SafeERC20} from "contracts/lending/core/dependencies/openzeppelin/contracts/SafeERC20.sol";
import {PercentageMath} from "contracts/lending/core/protocol/libraries/math/PercentageMath.sol";
import {IPoolAddressesProvider} from "contracts/lending/core/interfaces/IPoolAddressesProvider.sol";
import {IERC20Detailed} from "contracts/lending/core/dependencies/openzeppelin/contracts/IERC20Detailed.sol";
import {IOdosRouterV2} from "contracts/odos/interface/IOdosRouterV2.sol";
import {BaseOdosSwapAdapter} from "./BaseOdosSwapAdapter.sol";
import {OdosSwapUtils} from "contracts/odos/OdosSwapUtils.sol";

/**
 * @title BaseOdosSellAdapter
 * @notice Implements the logic for selling tokens on Odos
 */
abstract contract BaseOdosSellAdapter is BaseOdosSwapAdapter {
    using PercentageMath for uint256;
    using SafeERC20 for IERC20Detailed;

    /// @notice The address of the Odos Router
    IOdosRouterV2 public immutable swapRouter;

    /**
     * @dev Constructor
     * @param addressesProvider The address of the Aave PoolAddressesProvider contract
     * @param pool The address of the Aave Pool contract
     * @param _swapRouter The address of the Odos Router
     */
    constructor(
        IPoolAddressesProvider addressesProvider,
        address pool,
        IOdosRouterV2 _swapRouter
    ) BaseOdosSwapAdapter(addressesProvider, pool) {
        swapRouter = _swapRouter;
    }

    /**
     * @dev Swaps a token for another using Odos
     * @param assetToSwapFrom Address of the asset to be swapped from
     * @param assetToSwapTo Address of the asset to be swapped to
     * @param amountToSwap Amount to be swapped
     * @param minAmountToReceive Minimum amount to be received from the swap
     * @param swapData The encoded swap data for Odos
     * @return amountReceived The amount received from the swap
     */
    function _sellOnOdos(
        IERC20Detailed assetToSwapFrom,
        IERC20Detailed assetToSwapTo,
        uint256 amountToSwap,
        uint256 minAmountToReceive,
        bytes memory swapData
    ) internal returns (uint256 amountReceived) {
        uint256 balanceBeforeAssetFrom = assetToSwapFrom.balanceOf(
            address(this)
        );
        if (balanceBeforeAssetFrom < amountToSwap) {
            revert InsufficientBalanceBeforeSwap(
                balanceBeforeAssetFrom,
                amountToSwap
            );
        }

        address tokenIn = address(assetToSwapFrom);
        address tokenOut = address(assetToSwapTo);

        // Execute the swap using OdosSwapUtils
        amountReceived = OdosSwapUtils.excuteSwapOperation(
            swapRouter,
            tokenIn,
            amountToSwap,
            minAmountToReceive,
            swapData
        );

        emit Bought(tokenIn, tokenOut, amountToSwap, amountReceived);
    }
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.10;

import {IERC20} from "contracts/lending/core/dependencies/openzeppelin/contracts/IERC20.sol";
import {SafeERC20} from "contracts/lending/core/dependencies/openzeppelin/contracts/SafeERC20.sol";
import {IERC20Detailed} from "contracts/lending/core/dependencies/openzeppelin/contracts/IERC20Detailed.sol";
import {IERC20WithPermit} from "contracts/lending/core/interfaces/IERC20WithPermit.sol";
import {IPoolAddressesProvider} from "contracts/lending/core/interfaces/IPoolAddressesProvider.sol";
import {IPool} from "contracts/lending/core/interfaces/IPool.sol";
import {Ownable} from "contracts/lending/core/dependencies/openzeppelin/contracts/Ownable.sol";
import {IBaseOdosAdapter} from "./interfaces/IBaseOdosAdapter.sol";

/**
 * @title BaseOdosSwapAdapter
 * @notice Utility functions for adapters using Odos
 */
abstract contract BaseOdosSwapAdapter is Ownable, IBaseOdosAdapter {
    using SafeERC20 for IERC20;

    /* State Variables */
    /// The address of the Aave PoolAddressesProvider contract
    IPoolAddressesProvider public immutable ADDRESSES_PROVIDER;

    /// The address of the Aave Pool contract
    IPool public immutable POOL;

    /**
     * @dev Constructor
     * @param addressesProvider The address of the Aave PoolAddressesProvider contract
     * @param pool The address of the Aave Pool contract
     */
    constructor(IPoolAddressesProvider addressesProvider, address pool) {
        ADDRESSES_PROVIDER = addressesProvider;
        POOL = IPool(pool);
    }

    /**
     * @dev Get the vToken, sToken and aToken associated to the asset
     * @param asset The address of the asset
     * @return address The address of the VariableDebtToken, vToken
     * @return address The address of the StableDebtToken, sToken
     * @return address The address of the aToken
     */
    function _getReserveData(
        address asset
    ) internal view virtual returns (address, address, address);

    /**
     * @dev Supply an amount of asset to the Aave Pool
     * @param asset The address of the asset to be supplied
     * @param amount The amount of the asset to be supplied
     * @param to The address receiving the aTokens
     * @param referralCode The referral code to pass to Aave
     */
    function _supply(
        address asset,
        uint256 amount,
        address to,
        uint16 referralCode
    ) internal virtual;

    /**
     * @dev Pull the ATokens from the user and withdraws the underlying asset from the Aave Pool
     * @param reserve The address of the asset
     * @param user The address of the user to pull aTokens from
     * @param amount The amount of tokens to be pulled and withdrawn
     * @param permitInput struct containing the permit signature
     */
    function _pullATokenAndWithdraw(
        address reserve,
        address user,
        uint256 amount,
        PermitInput memory permitInput
    ) internal returns (uint256) {
        // If deadline is set to zero, assume there is no signature for permit
        if (permitInput.deadline != 0) {
            permitInput.aToken.permit(
                user,
                address(this),
                permitInput.value,
                permitInput.deadline,
                permitInput.v,
                permitInput.r,
                permitInput.s
            );
        }

        (, , address aToken) = _getReserveData(reserve);

        uint256 aTokenBalanceBefore = IERC20(aToken).balanceOf(address(this));
        IERC20(aToken).safeTransferFrom(user, address(this), amount);
        uint256 aTokenBalanceDiff = IERC20(aToken).balanceOf(address(this)) -
            aTokenBalanceBefore;

        POOL.withdraw(reserve, aTokenBalanceDiff, address(this));
        return aTokenBalanceDiff;
    }

    /**
     * @dev Renews the asset allowance in case the current allowance is below a given threshold
     * @param asset The address of the asset
     * @param minAmount The minimum required allowance to the Aave Pool
     */
    function _conditionalRenewAllowance(
        address asset,
        uint256 minAmount
    ) internal {
        uint256 allowance = IERC20(asset).allowance(
            address(this),
            address(POOL)
        );
        if (allowance < minAmount) {
            IERC20(asset).safeApprove(address(POOL), 0);
            IERC20(asset).safeApprove(address(POOL), type(uint256).max);
        }
    }

    /**
     * @dev Emergency rescue for token stucked on this contract, as failsafe mechanism
     * - Funds should never remain in this contract more time than during transactions
     * - Only callable by the owner
     */
    function rescueTokens(IERC20 token) external onlyOwner {
        token.safeTransfer(owner(), token.balanceOf(address(this)));
    }
}

// SPDX-License-Identifier: AGPL-3.0
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.10;

import {IERC20WithPermit} from "contracts/lending/core/interfaces/IERC20WithPermit.sol";

/**
 * @title IBaseOdosAdapter
 * @notice Interface for the BaseOdosAdapter
 */
interface IBaseOdosAdapter {
    /* Events */
    /**
     * @dev Emitted when a token is bought on Odos
     * @param tokenIn The address of the token sold
     * @param tokenOut The address of the token bought
     * @param amountIn The amount of tokens sold
     * @param amountOut The amount of tokens bought
     */
    event Bought(
        address indexed tokenIn,
        address indexed tokenOut,
        uint256 amountIn,
        uint256 amountOut
    );

    /* Custom Errors */
    /**
     * @dev Thrown when the balance before swap is insufficient
     * @param balance The actual balance
     * @param required The required balance
     */
    error InsufficientBalanceBeforeSwap(uint256 balance, uint256 required);

    /**
     * @dev Thrown when the output amount is less than the minimum expected
     * @param actual The actual output amount
     * @param expected The minimum expected output amount
     */
    error InsufficientOutputAmount(uint256 actual, uint256 expected);

    /**
     * @dev Thrown when the caller is not the pool
     * @param caller The actual caller
     * @param pool The expected pool
     */
    error CallerMustBePool(address caller, address pool);

    /**
     * @dev Thrown when the initiator is not the expected initiator
     * @param initiator The actual initiator
     * @param expectedInitiator The expected initiator
     */
    error InitiatorMustBeThis(address initiator, address expectedInitiator);

    /**
     * @dev Struct to hold permit data
     * @param aToken The aToken contract with permit functionality
     * @param value The amount of tokens to permit
     * @param deadline The deadline for the permit
     * @param v The v parameter of the signature
     * @param r The r parameter of the signature
     * @param s The s parameter of the signature
     */
    struct PermitInput {
        IERC20WithPermit aToken;
        uint256 value;
        uint256 deadline;
        uint8 v;
        bytes32 r;
        bytes32 s;
    }
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.10;

import {IBaseOdosAdapter} from "./IBaseOdosAdapter.sol";

/**
 * @title IOdosWithdrawSwapAdapter
 * @notice Defines the basic interface for OdosWithdrawSwapAdapter
 * @dev Implement this interface to provide functionality of withdrawing from the Aave Pool and swapping to another asset
 **/
interface IOdosWithdrawSwapAdapter is IBaseOdosAdapter {
    struct WithdrawSwapParams {
        address oldAsset; // the asset to withdraw and swap from
        uint256 oldAssetAmount; // the amount to withdraw
        address newAsset; // the asset to swap to
        uint256 minAmountToReceive; // the minimum amount of new asset to receive
        address user; // the address of user
        bytes swapData; // the swap data for Odos
    }

    /**
     * @notice Withdraws and swaps an asset that is supplied to the Aave Pool
     * @param withdrawSwapParams struct describing the withdraw swap
     * @param permitInput optional permit for collateral aToken
     */
    function withdrawAndSwap(
        WithdrawSwapParams memory withdrawSwapParams,
        PermitInput memory permitInput
    ) external;
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

pragma solidity ^0.8.10;

/**
 * @dev Contract module that helps prevent reentrant calls to a function.
 *
 * Inheriting from `ReentrancyGuard` will make the {nonReentrant} modifier
 * available, which can be applied to functions to make sure there are no nested
 * (reentrant) calls to them.
 *
 * Note that because there is a single `nonReentrant` guard, functions marked as
 * `nonReentrant` may not call one another. This can be worked around by making
 * those functions `private`, and then adding `external` `nonReentrant` entry
 * points to them.
 *
 * TIP: If you would like to learn more about reentrancy and alternative ways
 * to protect against it, check out our blog post
 * https://blog.openzeppelin.com/reentrancy-after-istanbul/[Reentrancy After Istanbul].
 */
abstract contract ReentrancyGuard {
    // Booleans are more expensive than uint256 or any type that takes up a full
    // word because each write operation emits an extra SLOAD to first read the
    // slot's contents, replace the bits taken up by the boolean, and then write
    // back. This is the compiler's defense against contract upgrades and
    // pointer aliasing, and it cannot be disabled.

    // The values being non-zero value makes deployment a bit more expensive,
    // but in exchange the refund on every call to nonReentrant will be lower in
    // amount. Since refunds are capped to a percentage of the total
    // transaction's gas, it is best to keep them low in cases like this one, to
    // increase the likelihood of the full refund coming into effect.
    uint256 private constant _NOT_ENTERED = 1;
    uint256 private constant _ENTERED = 2;

    uint256 private _status;

    constructor() {
        _status = _NOT_ENTERED;
    }

    /**
     * @dev Prevents a contract from calling itself, directly or indirectly.
     * Calling a `nonReentrant` function from another `nonReentrant`
     * function is not supported. It is possible to prevent this from happening
     * by making the `nonReentrant` function external, and make it call a
     * `private` function that does the actual work.
     */
    modifier nonReentrant() {
        // On the first call to nonReentrant, _notEntered will be true
        require(_status != _ENTERED, "ReentrancyGuard: reentrant call");

        // Any calls to nonReentrant after this point will fail
        _status = _ENTERED;

        _;

        // By storing the original value once again, a refund is triggered (see
        // https://eips.ethereum.org/EIPS/eip-2200)
        _status = _NOT_ENTERED;
    }
}

// SPDX-License-Identifier: GNU AGPLv3
pragma solidity 0.8.20;

import "./interface/IOdosRouterV2.sol";
import "@rari-capital/solmate/src/utils/SafeTransferLib.sol";

/**
 * @title OdosSwapUtils
 * @notice Library for handling Odos swaps in liquidator contracts
 */
library OdosSwapUtils {
    using SafeTransferLib for ERC20;

    /// @notice Custom error for failed swap with no revert reason
    error SwapFailed();
    /// @notice Custom error when actual output amount is less than expected
    error InsufficientOutput(uint256 expected, uint256 actual);

    /**
     * @notice Performs an swap operation using Odos router with swap data
     * @param router Odos router contract
     * @param inputToken Input token
     * @param maxIn Maximum input amount
     * @param exactOut Exact output amount
     * @param swapData Encoded swap path data
     */
    function excuteSwapOperation(
        IOdosRouterV2 router,
        address inputToken,
        uint256 maxIn,
        uint256 exactOut,
        bytes memory swapData
    ) internal returns (uint256) {
        ERC20(inputToken).approve(address(router), maxIn);

        (bool success, bytes memory result) = address(router).call(swapData);
        if (!success) {
            // Decode the revert reason if present
            if (result.length > 0) {
                // First try to decode the standard revert reason
                assembly {
                    let resultLength := mload(result)
                    revert(add(32, result), resultLength)
                }
            }
            revert SwapFailed();
        }

        uint256 actualAmountOut;
        assembly {
            actualAmountOut := mload(add(result, 32))
        }

        if (actualAmountOut < exactOut) {
            revert InsufficientOutput(exactOut, actualAmountOut);
        }

        return actualAmountOut;
    }
}

// SPDX-License-Identifier: MIT
/* ———————————————————————————————————————————————————————————————————————————————— *
 *    _____     ______   ______     __     __   __     __     ______   __  __       *
 *   /\  __-.  /\__  _\ /\  == \   /\ \   /\ "-.\ \   /\ \   /\__  _\ /\ \_\ \      *
 *   \ \ \/\ \ \/_/\ \/ \ \  __<   \ \ \  \ \ \-.  \  \ \ \  \/_/\ \/ \ \____ \     *
 *    \ \____-    \ \_\  \ \_\ \_\  \ \_\  \ \_\\"\_\  \ \_\    \ \_\  \/\_____\    *
 *     \/____/     \/_/   \/_/ /_/   \/_/   \/_/ \/_/   \/_/     \/_/   \/_____/    *
 *                                                                                  *
 * ————————————————————————————————— dtrinity.org ————————————————————————————————— *
 *                                                                                  *
 *                                         ▲                                        *
 *                                        ▲ ▲                                       *
 *                                                                                  *
 * ———————————————————————————————————————————————————————————————————————————————— *
 * dTRINITY Protocol: https://github.com/dtrinity                                   *
 * ———————————————————————————————————————————————————————————————————————————————— */

/**
 * @dev Interface for Odos Router V2.
 * @dev Generated from original ABI: https://fraxscan.com/address/0x56c85a254dd12ee8d9c04049a4ab62769ce98210#code
 */
pragma solidity ^0.8.20;

interface IOdosRouterV2 {
    struct swapTokenInfo {
        address inputToken;
        uint256 inputAmount;
        address inputReceiver;
        address outputToken;
        uint256 outputQuote;
        uint256 outputMin;
        address outputReceiver;
    }

    struct inputTokenInfo {
        address tokenAddress;
        uint256 amountIn;
        address receiver;
    }

    struct outputTokenInfo {
        address tokenAddress;
        uint256 relativeValue;
        address receiver;
    }

    struct permit2Info {
        address contractAddress;
        uint256 nonce;
        uint256 deadline;
        bytes signature;
    }

    event OwnershipTransferred(
        address indexed previousOwner,
        address indexed newOwner
    );
    event Swap(
        address sender,
        uint256 inputAmount,
        address inputToken,
        uint256 amountOut,
        address outputToken,
        int256 slippage,
        uint32 referralCode
    );
    event SwapMulti(
        address sender,
        uint256[] amountsIn,
        address[] tokensIn,
        uint256[] amountsOut,
        address[] tokensOut,
        uint32 referralCode
    );

    function FEE_DENOM() external view returns (uint256);

    function REFERRAL_WITH_FEE_THRESHOLD() external view returns (uint256);

    function addressList(uint256) external view returns (address);

    function owner() external view returns (address);

    function referralLookup(
        uint32
    )
        external
        view
        returns (uint64 referralFee, address beneficiary, bool registered);

    function registerReferralCode(
        uint32 _referralCode,
        uint64 _referralFee,
        address _beneficiary
    ) external;

    function renounceOwnership() external;

    function setSwapMultiFee(uint256 _swapMultiFee) external;

    function swap(
        swapTokenInfo calldata tokenInfo,
        bytes calldata pathDefinition,
        address executor,
        uint32 referralCode
    ) external payable returns (uint256 amountOut);

    function swapCompact() external payable returns (uint256);

    function swapMulti(
        inputTokenInfo[] calldata inputs,
        outputTokenInfo[] calldata outputs,
        uint256 valueOutMin,
        bytes calldata pathDefinition,
        address executor,
        uint32 referralCode
    ) external payable returns (uint256[] memory amountsOut);

    function swapMultiCompact()
        external
        payable
        returns (uint256[] memory amountsOut);

    function swapMultiFee() external view returns (uint256);

    function swapMultiPermit2(
        permit2Info calldata permit2,
        inputTokenInfo[] calldata inputs,
        outputTokenInfo[] calldata outputs,
        uint256 valueOutMin,
        bytes calldata pathDefinition,
        address executor,
        uint32 referralCode
    ) external payable returns (uint256[] memory amountsOut);

    function swapPermit2(
        permit2Info calldata permit2,
        swapTokenInfo calldata tokenInfo,
        bytes calldata pathDefinition,
        address executor,
        uint32 referralCode
    ) external returns (uint256 amountOut);

    function swapRouterFunds(
        inputTokenInfo[] calldata inputs,
        outputTokenInfo[] calldata outputs,
        uint256 valueOutMin,
        bytes calldata pathDefinition,
        address executor
    ) external returns (uint256[] memory amountsOut);

    function transferOwnership(address newOwner) external;

    function transferRouterFunds(
        address[] calldata tokens,
        uint256[] calldata amounts,
        address dest
    ) external;

    function writeAddressList(address[] calldata addresses) external;

    receive() external payable;
}

{
  "evmVersion": "london",
  "libraries": {},
  "metadata": {
    "bytecodeHash": "ipfs",
    "useLiteralContent": true
  },
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "remappings": [],
  "viaIR": true,
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"contract IPoolAddressesProvider","name":"addressesProvider","type":"address"},{"internalType":"address","name":"pool","type":"address"},{"internalType":"contract IOdosRouterV2","name":"swapRouter","type":"address"},{"internalType":"address","name":"owner","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"inputs":[{"internalType":"address","name":"caller","type":"address"},{"internalType":"address","name":"pool","type":"address"}],"name":"CallerMustBePool","type":"error"},{"inputs":[{"internalType":"address","name":"initiator","type":"address"},{"internalType":"address","name":"expectedInitiator","type":"address"}],"name":"InitiatorMustBeThis","type":"error"},{"inputs":[{"internalType":"uint256","name":"balance","type":"uint256"},{"internalType":"uint256","name":"required","type":"uint256"}],"name":"InsufficientBalanceBeforeSwap","type":"error"},{"inputs":[{"internalType":"uint256","name":"expected","type":"uint256"},{"internalType":"uint256","name":"actual","type":"uint256"}],"name":"InsufficientOutput","type":"error"},{"inputs":[{"internalType":"uint256","name":"actual","type":"uint256"},{"internalType":"uint256","name":"expected","type":"uint256"}],"name":"InsufficientOutputAmount","type":"error"},{"inputs":[],"name":"SwapFailed","type":"error"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"tokenIn","type":"address"},{"indexed":true,"internalType":"address","name":"tokenOut","type":"address"},{"indexed":false,"internalType":"uint256","name":"amountIn","type":"uint256"},{"indexed":false,"internalType":"uint256","name":"amountOut","type":"uint256"}],"name":"Bought","type":"event"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"previousOwner","type":"address"},{"indexed":true,"internalType":"address","name":"newOwner","type":"address"}],"name":"OwnershipTransferred","type":"event"},{"inputs":[],"name":"ADDRESSES_PROVIDER","outputs":[{"internalType":"contract IPoolAddressesProvider","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"POOL","outputs":[{"internalType":"contract IPool","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"owner","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"renounceOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"internalType":"contract IERC20","name":"token","type":"address"}],"name":"rescueTokens","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"swapRouter","outputs":[{"internalType":"contract IOdosRouterV2","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[{"internalType":"address","name":"newOwner","type":"address"}],"name":"transferOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[{"components":[{"internalType":"address","name":"oldAsset","type":"address"},{"internalType":"uint256","name":"oldAssetAmount","type":"uint256"},{"internalType":"address","name":"newAsset","type":"address"},{"internalType":"uint256","name":"minAmountToReceive","type":"uint256"},{"internalType":"address","name":"user","type":"address"},{"internalType":"bytes","name":"swapData","type":"bytes"}],"internalType":"struct IOdosWithdrawSwapAdapter.WithdrawSwapParams","name":"withdrawSwapParams","type":"tuple"},{"components":[{"internalType":"contract IERC20WithPermit","name":"aToken","type":"address"},{"internalType":"uint256","name":"value","type":"uint256"},{"internalType":"uint256","name":"deadline","type":"uint256"},{"internalType":"uint8","name":"v","type":"uint8"},{"internalType":"bytes32","name":"r","type":"bytes32"},{"internalType":"bytes32","name":"s","type":"bytes32"}],"internalType":"struct IBaseOdosAdapter.PermitInput","name":"permitInput","type":"tuple"}],"name":"withdrawAndSwap","outputs":[],"stateMutability":"nonpayable","type":"function"}]

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

000000000000000000000000d9c622d64342b5faceef4d366b974aef6dcb338d000000000000000000000000d76c827ee2ce1e37c37fc2ce91376812d3c9bce200000000000000000000000056c85a254dd12ee8d9c04049a4ab62769ce982100000000000000000000000000f5e3d9aee7ab5fda909af1ef147d98a7f4b3022

-----Decoded View---------------
Arg [0] : addressesProvider (address): 0xD9C622d64342B5FaCeef4d366B974AEf6dCB338D
Arg [1] : pool (address): 0xD76C827Ee2Ce1E37c37Fc2ce91376812d3c9BCE2
Arg [2] : swapRouter (address): 0x56c85a254DD12eE8D9C04049a4ab62769Ce98210
Arg [3] : owner (address): 0x0f5e3D9AEe7Ab5fDa909Af1ef147D98a7f4B3022

-----Encoded View---------------
4 Constructor Arguments found :
Arg [0] : 000000000000000000000000d9c622d64342b5faceef4d366b974aef6dcb338d
Arg [1] : 000000000000000000000000d76c827ee2ce1e37c37fc2ce91376812d3c9bce2
Arg [2] : 00000000000000000000000056c85a254dd12ee8d9c04049a4ab62769ce98210
Arg [3] : 0000000000000000000000000f5e3d9aee7ab5fda909af1ef147d98a7f4b3022