Contract Source Code (Solidity Standard Json-Input format)

IDE

• Blockscan IDE
• 🤖 Code ReaderBeta

More Options

• Similar
• Submit Audit
• Compare

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

import "../interfaces/IBooster.sol";
import "../interfaces/IVoterProxy.sol";
import "../interfaces/IFraxtalVoteEscrow.sol";
import "../interfaces/IFpisMigrate.sol";
import '@openzeppelin/contracts/token/ERC20/IERC20.sol';
import '@openzeppelin/contracts/token/ERC20/utils/SafeERC20.sol';

/*
Fpis locker - pull fpis from migration contract and lock
*/
contract FraxtalFpisLocker{
    using SafeERC20 for IERC20;

    uint256 private constant MAXTIME = 4 * 365 * 86400;
    uint256 private constant WEEK = 7 * 86400;

    address public immutable staker;
    address public immutable migrator;
    address public immutable fpis;
    uint256 public unlockTime;

    event Deposited(address indexed _address, uint256 _amount);
    event TimeIncreased(uint256 _end);

    constructor(address _staker, address _migrator, address _fpis){
        staker = _staker;
        migrator = _migrator;
        fpis = _fpis;
        uint256 unlockAt = block.timestamp + MAXTIME;
        uint256 unlockInWeeks = (unlockAt/WEEK)*WEEK;
        unlockTime = unlockInWeeks;
    }

    modifier onlyOwner() {
        require(IBooster(_currentBooster()).owner() == msg.sender, "!owner");
        _;
    }

    function revertOwnership() external onlyOwner{
        IFpisMigrate(migrator).setPendingOwner( IBooster(_currentBooster()).owner() );
    }

    function acceptOwnership() external{
        IFpisMigrate(migrator).acceptPendingOwner();
    }

    function _currentBooster() internal view returns(address){
        return IVoterProxy(staker).operator();
    }

    //lock
    function _lock() internal {
        uint256 balance = IERC20(fpis).balanceOf(address(this));
        if(balance > 0){
            IERC20(fpis).safeTransfer(staker, balance);
        }
        
        //increase ammount
        uint256 balanceStaker = IERC20(fpis).balanceOf(staker);
        if(balanceStaker > 0){
            //increase amount
            IBooster(_currentBooster()).increaseFpisAmount(balanceStaker,0);
        }
        
        //increase time
        increaseLockTime();
    }

    function nextUnlock() external view returns(uint256){
        uint256 unlockAt = block.timestamp + MAXTIME;
        uint256 unlockInWeeks = (unlockAt/WEEK)*WEEK;
        return unlockInWeeks;
    }

    function increaseLockTime() public{
        uint256 unlockAt = block.timestamp + MAXTIME;
        uint256 unlockInWeeks = (unlockAt/WEEK)*WEEK;

        //increase time if needed
        if( unlockInWeeks > unlockTime){
            IBooster(_currentBooster()).increaseFpisUnlockTime(uint128(unlockAt),0);
            unlockTime = unlockInWeeks;
            emit TimeIncreased(unlockAt);
        }
    }

    function lock() external {
        IFpisMigrate(migrator).withdrawTo(fpis,IERC20(fpis).balanceOf(migrator),staker);
        _lock();
    }
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

interface IVoterProxy{
    function operator() external view returns(address);
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

interface IFraxtalVoteEscrow {
    function lockedById(address _addr, uint256 _id) external view returns (int128 _amount, uint128 _end);
    function lockedByIndex(address _addr, uint128 _index) external view returns (int128 _amount, uint128 _end);
    function lockedEnd(address _addr, uint128 _index) external view returns (uint256);
    function getLockIndexById(address _addr, uint256 _id) external view returns (uint128 _index);
    function createLock(address _addr, uint256 _value,uint128 _unlockTime) external returns (uint128 _index, uint256 _newLockId);
    function depositFor(address _addr, uint256 _value, uint128 _lockIndex) external;
    function increaseAmount(uint256 _value, uint128 _lockIndex) external;
    function increaseUnlockTime(uint128 _unlockTime, uint128 _lockIndex) external;
    function withdraw(uint128 _lockIndex) external returns (uint256 _value);
    function checkpoint() external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

interface IFpisMigrate {
   function setPendingOwner(address _po) external;
   function acceptPendingOwner() external;
   function execute(
        address _to,
        uint256 _value,
        bytes calldata _data
    ) external returns (bool, bytes memory);
   function withdrawTo(address _asset, uint256 _amount, address _to) external;
   function migrate(uint256 _fpisAmount, uint256 _cvxfpisAmount) external;
}

// SPDX-License-Identifier: MIT
pragma solidity 0.8.10;

interface IBooster {
   function addPool(address _implementation, address _stakingAddress, address _stakingToken) external;
   function deactivatePool(uint256 _pid) external;
   function setPoolRewardImplementation(address _impl) external;
   function setRewardActiveOnCreation(bool _active) external;
   function voteGaugeWeight(address _controller, address _gauge, uint256 _weight) external;
   function setDelegate(address _delegateContract, address _delegate, bytes32 _space) external;
   function owner() external returns(address);
   function rewardManager() external returns(address);
   function fxsDepositor() external returns(address);
   function isShutdown() external returns(bool);
   function createVault(uint256 _pid) external returns (address);
   function claimFees() external;
   function increaseAmount(uint256 _value, uint128 _lockIndex) external;
   function increaseUnlockTime(uint128 _unlockTime, uint128 _lockIndex) external;
   function increaseFpisAmount(uint256 _value, uint128 _lockIndex) external;
   function increaseFpisUnlockTime(uint128 _unlockTime, uint128 _lockIndex) external;
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (utils/Address.sol)

pragma solidity ^0.8.1;

/**
 * @dev Collection of functions related to the address type
 */
library Address {
    /**
     * @dev Returns true if `account` is a contract.
     *
     * [IMPORTANT]
     * ====
     * It is unsafe to assume that an address for which this function returns
     * false is an externally-owned account (EOA) and not a contract.
     *
     * Among others, `isContract` will return false for the following
     * types of addresses:
     *
     *  - an externally-owned account
     *  - a contract in construction
     *  - an address where a contract will be created
     *  - an address where a contract lived, but was destroyed
     *
     * Furthermore, `isContract` will also return true if the target contract within
     * the same transaction is already scheduled for destruction by `SELFDESTRUCT`,
     * which only has an effect at the end of a transaction.
     * ====
     *
     * [IMPORTANT]
     * ====
     * You shouldn't rely on `isContract` to protect against flash loan attacks!
     *
     * Preventing calls from contracts is highly discouraged. It breaks composability, breaks support for smart wallets
     * like Gnosis Safe, and does not provide security since it can be circumvented by calling from a contract
     * constructor.
     * ====
     */
    function isContract(address account) internal view returns (bool) {
        // This method relies on extcodesize/address.code.length, which returns 0
        // for contracts in construction, since the code is only stored at the end
        // of the constructor execution.

        return account.code.length > 0;
    }

    /**
     * @dev Replacement for Solidity's `transfer`: sends `amount` wei to
     * `recipient`, forwarding all available gas and reverting on errors.
     *
     * https://eips.ethereum.org/EIPS/eip-1884[EIP1884] increases the gas cost
     * of certain opcodes, possibly making contracts go over the 2300 gas limit
     * imposed by `transfer`, making them unable to receive funds via
     * `transfer`. {sendValue} removes this limitation.
     *
     * https://consensys.net/diligence/blog/2019/09/stop-using-soliditys-transfer-now/[Learn more].
     *
     * IMPORTANT: because control is transferred to `recipient`, care must be
     * taken to not create reentrancy vulnerabilities. Consider using
     * {ReentrancyGuard} or the
     * https://solidity.readthedocs.io/en/v0.8.0/security-considerations.html#use-the-checks-effects-interactions-pattern[checks-effects-interactions pattern].
     */
    function sendValue(address payable recipient, uint256 amount) internal {
        require(address(this).balance >= amount, "Address: insufficient balance");

        (bool success, ) = recipient.call{value: amount}("");
        require(success, "Address: unable to send value, recipient may have reverted");
    }

    /**
     * @dev Performs a Solidity function call using a low level `call`. A
     * plain `call` is an unsafe replacement for a function call: use this
     * function instead.
     *
     * If `target` reverts with a revert reason, it is bubbled up by this
     * function (like regular Solidity function calls).
     *
     * Returns the raw returned data. To convert to the expected return value,
     * use https://solidity.readthedocs.io/en/latest/units-and-global-variables.html?highlight=abi.decode#abi-encoding-and-decoding-functions[`abi.decode`].
     *
     * Requirements:
     *
     * - `target` must be a contract.
     * - calling `target` with `data` must not revert.
     *
     * _Available since v3.1._
     */
    function functionCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, "Address: low-level call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`], but with
     * `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        return functionCallWithValue(target, data, 0, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but also transferring `value` wei to `target`.
     *
     * Requirements:
     *
     * - the calling contract must have an ETH balance of at least `value`.
     * - the called Solidity function must be `payable`.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(address target, bytes memory data, uint256 value) internal returns (bytes memory) {
        return functionCallWithValue(target, data, value, "Address: low-level call with value failed");
    }

    /**
     * @dev Same as {xref-Address-functionCallWithValue-address-bytes-uint256-}[`functionCallWithValue`], but
     * with `errorMessage` as a fallback revert reason when `target` reverts.
     *
     * _Available since v3.1._
     */
    function functionCallWithValue(
        address target,
        bytes memory data,
        uint256 value,
        string memory errorMessage
    ) internal returns (bytes memory) {
        require(address(this).balance >= value, "Address: insufficient balance for call");
        (bool success, bytes memory returndata) = target.call{value: value}(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(address target, bytes memory data) internal view returns (bytes memory) {
        return functionStaticCall(target, data, "Address: low-level static call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a static call.
     *
     * _Available since v3.3._
     */
    function functionStaticCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        (bool success, bytes memory returndata) = target.staticcall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(address target, bytes memory data) internal returns (bytes memory) {
        return functionDelegateCall(target, data, "Address: low-level delegate call failed");
    }

    /**
     * @dev Same as {xref-Address-functionCall-address-bytes-string-}[`functionCall`],
     * but performing a delegate call.
     *
     * _Available since v3.4._
     */
    function functionDelegateCall(
        address target,
        bytes memory data,
        string memory errorMessage
    ) internal returns (bytes memory) {
        (bool success, bytes memory returndata) = target.delegatecall(data);
        return verifyCallResultFromTarget(target, success, returndata, errorMessage);
    }

    /**
     * @dev Tool to verify that a low level call to smart-contract was successful, and revert (either by bubbling
     * the revert reason or using the provided one) in case of unsuccessful call or if target was not a contract.
     *
     * _Available since v4.8._
     */
    function verifyCallResultFromTarget(
        address target,
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal view returns (bytes memory) {
        if (success) {
            if (returndata.length == 0) {
                // only check isContract if the call was successful and the return data is empty
                // otherwise we already know that it was a contract
                require(isContract(target), "Address: call to non-contract");
            }
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    /**
     * @dev Tool to verify that a low level call was successful, and revert if it wasn't, either by bubbling the
     * revert reason or using the provided one.
     *
     * _Available since v4.3._
     */
    function verifyCallResult(
        bool success,
        bytes memory returndata,
        string memory errorMessage
    ) internal pure returns (bytes memory) {
        if (success) {
            return returndata;
        } else {
            _revert(returndata, errorMessage);
        }
    }

    function _revert(bytes memory returndata, string memory errorMessage) private pure {
        // Look for revert reason and bubble it up if present
        if (returndata.length > 0) {
            // The easiest way to bubble the revert reason is using memory via assembly
            /// @solidity memory-safe-assembly
            assembly {
                let returndata_size := mload(returndata)
                revert(add(32, returndata), returndata_size)
            }
        } else {
            revert(errorMessage);
        }
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.3) (token/ERC20/utils/SafeERC20.sol)

pragma solidity ^0.8.0;

import "../IERC20.sol";
import "../extensions/IERC20Permit.sol";
import "../../../utils/Address.sol";

/**
 * @title SafeERC20
 * @dev Wrappers around ERC20 operations that throw on failure (when the token
 * contract returns false). Tokens that return no value (and instead revert or
 * throw on failure) are also supported, non-reverting calls are assumed to be
 * successful.
 * To use this library you can add a `using SafeERC20 for IERC20;` statement to your contract,
 * which allows you to call the safe operations as `token.safeTransfer(...)`, etc.
 */
library SafeERC20 {
    using Address for address;

    /**
     * @dev Transfer `value` amount of `token` from the calling contract to `to`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeTransfer(IERC20 token, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transfer.selector, to, value));
    }

    /**
     * @dev Transfer `value` amount of `token` from `from` to `to`, spending the approval given by `from` to the
     * calling contract. If `token` returns no value, non-reverting calls are assumed to be successful.
     */
    function safeTransferFrom(IERC20 token, address from, address to, uint256 value) internal {
        _callOptionalReturn(token, abi.encodeWithSelector(token.transferFrom.selector, from, to, value));
    }

    /**
     * @dev Deprecated. This function has issues similar to the ones found in
     * {IERC20-approve}, and its usage is discouraged.
     *
     * Whenever possible, use {safeIncreaseAllowance} and
     * {safeDecreaseAllowance} instead.
     */
    function safeApprove(IERC20 token, address spender, uint256 value) internal {
        // safeApprove should only be called when setting an initial allowance,
        // or when resetting it to zero. To increase and decrease it, use
        // 'safeIncreaseAllowance' and 'safeDecreaseAllowance'
        require(
            (value == 0) || (token.allowance(address(this), spender) == 0),
            "SafeERC20: approve from non-zero to non-zero allowance"
        );
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, value));
    }

    /**
     * @dev Increase the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeIncreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        uint256 oldAllowance = token.allowance(address(this), spender);
        _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance + value));
    }

    /**
     * @dev Decrease the calling contract's allowance toward `spender` by `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful.
     */
    function safeDecreaseAllowance(IERC20 token, address spender, uint256 value) internal {
        unchecked {
            uint256 oldAllowance = token.allowance(address(this), spender);
            require(oldAllowance >= value, "SafeERC20: decreased allowance below zero");
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, oldAllowance - value));
        }
    }

    /**
     * @dev Set the calling contract's allowance toward `spender` to `value`. If `token` returns no value,
     * non-reverting calls are assumed to be successful. Meant to be used with tokens that require the approval
     * to be set to zero before setting it to a non-zero value, such as USDT.
     */
    function forceApprove(IERC20 token, address spender, uint256 value) internal {
        bytes memory approvalCall = abi.encodeWithSelector(token.approve.selector, spender, value);

        if (!_callOptionalReturnBool(token, approvalCall)) {
            _callOptionalReturn(token, abi.encodeWithSelector(token.approve.selector, spender, 0));
            _callOptionalReturn(token, approvalCall);
        }
    }

    /**
     * @dev Use a ERC-2612 signature to set the `owner` approval toward `spender` on `token`.
     * Revert on invalid signature.
     */
    function safePermit(
        IERC20Permit token,
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) internal {
        uint256 nonceBefore = token.nonces(owner);
        token.permit(owner, spender, value, deadline, v, r, s);
        uint256 nonceAfter = token.nonces(owner);
        require(nonceAfter == nonceBefore + 1, "SafeERC20: permit did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     */
    function _callOptionalReturn(IERC20 token, bytes memory data) private {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We use {Address-functionCall} to perform this call, which verifies that
        // the target address contains contract code and also asserts for success in the low-level call.

        bytes memory returndata = address(token).functionCall(data, "SafeERC20: low-level call failed");
        require(returndata.length == 0 || abi.decode(returndata, (bool)), "SafeERC20: ERC20 operation did not succeed");
    }

    /**
     * @dev Imitates a Solidity high-level call (i.e. a regular function call to a contract), relaxing the requirement
     * on the return value: the return value is optional (but if data is returned, it must not be false).
     * @param token The token targeted by the call.
     * @param data The call data (encoded using abi.encode or one of its variants).
     *
     * This is a variant of {_callOptionalReturn} that silents catches all reverts and returns a bool instead.
     */
    function _callOptionalReturnBool(IERC20 token, bytes memory data) private returns (bool) {
        // We need to perform a low level call here, to bypass Solidity's return data size checking mechanism, since
        // we're implementing it ourselves. We cannot use {Address-functionCall} here since this should return false
        // and not revert is the subcall reverts.

        (bool success, bytes memory returndata) = address(token).call(data);
        return
            success && (returndata.length == 0 || abi.decode(returndata, (bool))) && Address.isContract(address(token));
    }
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.4) (token/ERC20/extensions/IERC20Permit.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 Permit extension allowing approvals to be made via signatures, as defined in
 * https://eips.ethereum.org/EIPS/eip-2612[EIP-2612].
 *
 * Adds the {permit} method, which can be used to change an account's ERC20 allowance (see {IERC20-allowance}) by
 * presenting a message signed by the account. By not relying on {IERC20-approve}, the token holder account doesn't
 * need to send a transaction, and thus is not required to hold Ether at all.
 *
 * ==== Security Considerations
 *
 * There are two important considerations concerning the use of `permit`. The first is that a valid permit signature
 * expresses an allowance, and it should not be assumed to convey additional meaning. In particular, it should not be
 * considered as an intention to spend the allowance in any specific way. The second is that because permits have
 * built-in replay protection and can be submitted by anyone, they can be frontrun. A protocol that uses permits should
 * take this into consideration and allow a `permit` call to fail. Combining these two aspects, a pattern that may be
 * generally recommended is:
 *
 * ```solidity
 * function doThingWithPermit(..., uint256 value, uint256 deadline, uint8 v, bytes32 r, bytes32 s) public {
 *     try token.permit(msg.sender, address(this), value, deadline, v, r, s) {} catch {}
 *     doThing(..., value);
 * }
 *
 * function doThing(..., uint256 value) public {
 *     token.safeTransferFrom(msg.sender, address(this), value);
 *     ...
 * }
 * ```
 *
 * Observe that: 1) `msg.sender` is used as the owner, leaving no ambiguity as to the signer intent, and 2) the use of
 * `try/catch` allows the permit to fail and makes the code tolerant to frontrunning. (See also
 * {SafeERC20-safeTransferFrom}).
 *
 * Additionally, note that smart contract wallets (such as Argent or Safe) are not able to produce permit signatures, so
 * contracts should have entry points that don't rely on permit.
 */
interface IERC20Permit {
    /**
     * @dev Sets `value` as the allowance of `spender` over ``owner``'s tokens,
     * given ``owner``'s signed approval.
     *
     * IMPORTANT: The same issues {IERC20-approve} has related to transaction
     * ordering also apply here.
     *
     * Emits an {Approval} event.
     *
     * Requirements:
     *
     * - `spender` cannot be the zero address.
     * - `deadline` must be a timestamp in the future.
     * - `v`, `r` and `s` must be a valid `secp256k1` signature from `owner`
     * over the EIP712-formatted function arguments.
     * - the signature must use ``owner``'s current nonce (see {nonces}).
     *
     * For more information on the signature format, see the
     * https://eips.ethereum.org/EIPS/eip-2612#specification[relevant EIP
     * section].
     *
     * CAUTION: See Security Considerations above.
     */
    function permit(
        address owner,
        address spender,
        uint256 value,
        uint256 deadline,
        uint8 v,
        bytes32 r,
        bytes32 s
    ) external;

    /**
     * @dev Returns the current nonce for `owner`. This value must be
     * included whenever a signature is generated for {permit}.
     *
     * Every successful call to {permit} increases ``owner``'s nonce by one. This
     * prevents a signature from being used multiple times.
     */
    function nonces(address owner) external view returns (uint256);

    /**
     * @dev Returns the domain separator used in the encoding of the signature for {permit}, as defined by {EIP712}.
     */
    // solhint-disable-next-line func-name-mixedcase
    function DOMAIN_SEPARATOR() external view returns (bytes32);
}

// SPDX-License-Identifier: MIT
// OpenZeppelin Contracts (last updated v4.9.0) (token/ERC20/IERC20.sol)

pragma solidity ^0.8.0;

/**
 * @dev Interface of the ERC20 standard as defined in the EIP.
 */
interface IERC20 {
    /**
     * @dev Emitted when `value` tokens are moved from one account (`from`) to
     * another (`to`).
     *
     * Note that `value` may be zero.
     */
    event Transfer(address indexed from, address indexed to, uint256 value);

    /**
     * @dev Emitted when the allowance of a `spender` for an `owner` is set by
     * a call to {approve}. `value` is the new allowance.
     */
    event Approval(address indexed owner, address indexed spender, uint256 value);

    /**
     * @dev Returns the amount of tokens in existence.
     */
    function totalSupply() external view returns (uint256);

    /**
     * @dev Returns the amount of tokens owned by `account`.
     */
    function balanceOf(address account) external view returns (uint256);

    /**
     * @dev Moves `amount` tokens from the caller's account to `to`.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transfer(address to, uint256 amount) external returns (bool);

    /**
     * @dev Returns the remaining number of tokens that `spender` will be
     * allowed to spend on behalf of `owner` through {transferFrom}. This is
     * zero by default.
     *
     * This value changes when {approve} or {transferFrom} are called.
     */
    function allowance(address owner, address spender) external view returns (uint256);

    /**
     * @dev Sets `amount` as the allowance of `spender` over the caller's tokens.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * IMPORTANT: Beware that changing an allowance with this method brings the risk
     * that someone may use both the old and the new allowance by unfortunate
     * transaction ordering. One possible solution to mitigate this race
     * condition is to first reduce the spender's allowance to 0 and set the
     * desired value afterwards:
     * https://github.com/ethereum/EIPs/issues/20#issuecomment-263524729
     *
     * Emits an {Approval} event.
     */
    function approve(address spender, uint256 amount) external returns (bool);

    /**
     * @dev Moves `amount` tokens from `from` to `to` using the
     * allowance mechanism. `amount` is then deducted from the caller's
     * allowance.
     *
     * Returns a boolean value indicating whether the operation succeeded.
     *
     * Emits a {Transfer} event.
     */
    function transferFrom(address from, address to, uint256 amount) external returns (bool);
}

{
  "remappings": [],
  "optimizer": {
    "enabled": true,
    "runs": 200
  },
  "evmVersion": "london",
  "libraries": {},
  "outputSelection": {
    "*": {
      "*": [
        "evm.bytecode",
        "evm.deployedBytecode",
        "devdoc",
        "userdoc",
        "metadata",
        "abi"
      ]
    }
  }
}

• No Contract Security Audit Submitted- Submit Audit Here

[{"inputs":[{"internalType":"address","name":"_staker","type":"address"},{"internalType":"address","name":"_migrator","type":"address"},{"internalType":"address","name":"_fpis","type":"address"}],"stateMutability":"nonpayable","type":"constructor"},{"anonymous":false,"inputs":[{"indexed":true,"internalType":"address","name":"_address","type":"address"},{"indexed":false,"internalType":"uint256","name":"_amount","type":"uint256"}],"name":"Deposited","type":"event"},{"anonymous":false,"inputs":[{"indexed":false,"internalType":"uint256","name":"_end","type":"uint256"}],"name":"TimeIncreased","type":"event"},{"inputs":[],"name":"acceptOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"fpis","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"increaseLockTime","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"lock","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"migrator","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"nextUnlock","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"revertOwnership","outputs":[],"stateMutability":"nonpayable","type":"function"},{"inputs":[],"name":"staker","outputs":[{"internalType":"address","name":"","type":"address"}],"stateMutability":"view","type":"function"},{"inputs":[],"name":"unlockTime","outputs":[{"internalType":"uint256","name":"","type":"uint256"}],"stateMutability":"view","type":"function"}]

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

00000000000000000000000059cfcd384746ec3035299d90782be065e466800b000000000000000000000000cde8b51ce5809238c953dd4e95c689d88b602ecf000000000000000000000000fc00000000000000000000000000000000000004

-----Decoded View---------------
Arg [0] : _staker (address): 0x59CFCD384746ec3035299D90782Be065e466800B
Arg [1] : _migrator (address): 0xCdE8b51CE5809238C953dD4E95C689D88B602ECF
Arg [2] : _fpis (address): 0xfc00000000000000000000000000000000000004

-----Encoded View---------------
3 Constructor Arguments found :
Arg [0] : 00000000000000000000000059cfcd384746ec3035299d90782be065e466800b
Arg [1] : 000000000000000000000000cde8b51ce5809238c953dd4e95c689d88b602ecf
Arg [2] : 000000000000000000000000fc00000000000000000000000000000000000004